Hello, wandering if anybody has used a company to produce a custom inlay. I am looking at a custom design to put in a coffee table. I nosed around the web, but most of what I found was for multiple...
Type: Posts; User: brandon guthrie; Keyword(s):
Hello, wandering if anybody has used a company to produce a custom inlay. I am looking at a custom design to put in a coffee table. I nosed around the web, but most of what I found was for multiple...
There is not a wood kiln within 60 miles from where I live, I could assemble and stain/finish the rail and stiles, but trying keep it clamped together and still finish the wood under the clamps seems...
I have a couble doors with walnut panels and qswo rails and stiles. I have already prefinished the panels with laquer. I want to put a light stain on the rails and stiles. Should I prestain or put...
Just snagged one tonight in Ponca City, OK about 25 miles away. They price matched it at like $196.xx. Plus the rebate I'll send in, WHAT A DEAL!! Thanks to those on this forum for the heads up.
Thanks Jeff
Contemplating using space balls on some cabinet doors. Any body use them? What size and how much did you undersize the panel?
Just thought I would give an update. After contacting bosch tech support we both agreed that the new bit was the culprit. I exchanged it and used it tonight, man what a difference. I believe that...
The mounting height has nothing to do with flooding, it is there to avoid ignition of flammable vapors that might accumulate at floor level.
without a doubt get one with oil, they are quieter, and much more durable/longlasting. The extra maintenance, which is very little, is worth it. I have had to put new piston assemblies in oiless...
No I am not using a back cutter
I am no expert, so take it accordingly, but what about using small (1/8-3/16) braided cable with cable clamps or better the aluminum crimp ferules. This would work well for overall suspension work...
Yeah I am feeding the board the right way. I am kind of leaning on maybe there is something wrong with the bit. It is brand new, of good quality (bosch) but I tried different scrap hardwoods with...
any other ideas?
I am using a bosch 3.5" panel raising bit in a bosch 1617 evs 2.25 hp router on walnut and am having no luck. Even when I take very light passes (1/32"-1/16") at the lowest speed (8,000 rpm) the bit...