I appreciate the response. My DHCP IP is issued thru Comcast, my ISP. I cannot change it and can only get a fixed IP for a monthly charge.
Thanks,
Type: Posts; User: Bob Tate; Keyword(s):
I appreciate the response. My DHCP IP is issued thru Comcast, my ISP. I cannot change it and can only get a fixed IP for a monthly charge.
Thanks,
I don't think the disabling of driver signature signing is necessary in 8.1, either that or the driver is now signed. There was no mention of it in the Epilog instructions for 8.1. I spent a lot of...
I have been doing inlays with polymer clay in pens for a couple of years. No shrinkage but then they are fine lines. Wider stuff may shrink. I engrave, fill, then put them back on the lathe to finish...
If you (or your customer) has the license, I can give you all the barcodes you want. It is part of what I do during the day. I can scan each one with an ANSI verifier. I assume you are wanting UPC's...
There is no Histogram in Illustrator. Illustrator is a Vector program. Histogram's are for Raster.
I only have a 35 watt machine and cut 1/4" solid wood all the time. I love the way the laser cuts Cherry, Maple, and Alder. You can cut it just as well. And you can get all of the help you need right...
Now you walk around looking for things to Laser. Everything you see will become a "maybe I can laser that"! I think if affects everyone that way.
I don't think I ever read the instructions. I do sharpen it, the flat side, on a diamond hone. It works very well.
Bob
Very nice job. It looks very professional. Your wife will wear that with pride.
I wonder how many holster makers are considering a laser. In the long run it has to be cheaper than the current dies...
I have made boxes for a long time using gouge and scraper. Then I got the Ci0 and Ci1 and was amazed at how much faster it goes. And those Carbide tools give you a nice finish too. I definitely don't...
You pretty well have the idea. I think if you do one you will fall right into it. Most of the time I keep the width the same and just make segments longer or shorter. Either way works, and will...
I do check mine every once in a while but in four years it has never needed it. Pretty much spot on. Now I feel lucky.
I have a Mini 18. Do you suppose the smaller tables stay in alignment better?...
The software is nice but I don't use it very often. If you hunt, you will find a table that tells you what size segments for a given diameter ring. I mostly use that. If you set your lowest (first...
No Roger, you are not the only one. I am an expert procrastinator!
Bob
My Nova Cole Jaws are 1/4".
I also bought the woodturners kit and it fits like it was made for the Jet. Pretty close clone, huh?
Too bad Jet didn't do a better job on their accessories. Tormek has gotten a lot of my money...
I don't know if it will help your situation or not but it did the trick for me. I was doing flight simulator instrument and radio panels. Lots of cuts in small panels. The cracking happened over...
I do that quite often. I use the MinWax #209, that is the stain without the color in it. A couple of coats of that. When dry, wet sand with Mineral Spirits. Realls fills grain and makes a nice smooth...
I saw it on brandsoftheworld.com
Bob
Tandy Leather sells blank belt buckles. I cut and engraved a bunch of those. I attached the leather to the steel buckle with Silicone RTV. I think that stuff holds forever.
BobT
Maybe the Epilog Techies should take over General Motors?
Yeah, Peck for President.
Bob
I see you no longer need it, but if you need rolls or cork in the future, every Ace Hardware stocks it in 2 thicknesses, I think it was 1/8 and 1/4 inch.
Bob
I am assuming you are imaging from Corel. If you are using another app, this may still apply. I normally image from Adobe Illustrator. Even a hairline stroke, which normally prints to the center of...
I am using USB to Ethernet converters (yes, on both ends of a cat 5 cable) with a standard cat 5 cable, not a crossover, at the present time. It works flawlessly. It was a good solution for me....
The Photopolymer that Scott is referring to is old school. The term Digital Plates is what is used for the more popular process today. I use the system on a daily basis. The plate material I use is...