Search:

We have a new website just started in the past week for sharpeners and the sharpening industry. It is Sharpening Forums. If you need to ask sharpening related questions of professional sharpeners or...

Bobby,
Iam not aware of any but that does not mean there might not be one out there somewhere.

Thanks
Jim

Kevin,
Yes your dado set can be sharpened to cut smoother in the bottom of the cut. There are older poorly built sets out there that even with excellent sharpening just will not cut exactly perfect....

Todd,
If properly sharpened you should not see any strips or uneven areas across the cut if using all chippers. The individual chippers should all be exactly the same after being sharpened and all...

Hello,
We sharpen on average 40 carbide stacked dado sets every month. I know most woodworkers understand the importance of sending both the outer blades along with all the chippers that belong...

We sharpen about 25 stacked sets to every 1 wobble set. The 8 inch stacked sets are what we see the most of.
Depending on the dado set manufactuer the outer blade tips can run from flush with the...

Prices here are $1.68 for regular unleaded. Our pickup and delivery driver goes through a tank of gas a day and it sure has put a crunch on daily exspenses.
Jim Talbert
Cardinal Tool Sharpening...

If your chisels are in really bad condition, they can have the edges straightened and correct cutting angle put back on professionally. Your local sharpening shop should be setup to handle such a...

Thanks I will pass allot of the information provided here on to our customer. Seems like allot of very good ideas and suggestions. Hopefully he will be able to find a system that suits his needs. ...

Thanks it still might be something our customer can use to touch up his blades in between regular professional sharpenings.
Thanks Jim
Cardinal Tool Sharpening
www.cardinaltool.com

Rich,
Is this fixture used with or will attach to a bench grinder? Looks like it might be for holding the blades at the proper angle for hand honing.
Thanks Jim

Paul dont think I need a picture at this time, but will keep you very much in mind if our customer would like to have one, and thanks Paul we appreciate all your business.

Hello,
We have a customer who is looking for what he calls a bench grinder mounted fixture to sharpen/touch up his own planer and jointer blades with. Says he had seen one a couple of years ago but...

We received a sharpening order yesterday from out of state. 10 inch carbide blade, & a set of 20 inch planer blades. Had a note attached to the saw blade. Can you please remove the permanent magic...

I had the same problem trying to get into the board from my computer at the shop. I was not recoginized and when I tried to put in my email address and password the password was not accepted and I...

As a sharpener I see allot of different things used as saw guards for handsaws as well as circular saws.
Get handsaws in that have pieces of 3/8 plastic tubing cut to lenght that can be purchased at...

As a sharpener I see allot of different things used as saw guards for handsaws as well as circular saws.
We get handsaws in that have pieces of 3/8 inch plastic tubing cut to lenght that can be...