Jumpy Pro-5? Yep, same with my Pro-5. I sent to Festool twice to get it fixed. They replaced the flange on mine.
Type: Posts; User: Mike Nguyen; Keyword(s):
Jumpy Pro-5? Yep, same with my Pro-5. I sent to Festool twice to get it fixed. They replaced the flange on mine.
This is what I did for edge trimming because I want dust collection when I got the Ridgid trim router for $30 from Craigslist.
356335356336356337
I have the one with AAA battery installed my SawStop PCS for over 2 years with no problems at all.
For me 17 gallon drum is big enough unless I do a lot of jointing and planing which only happened twice so far for the past few years. I would get the fiber drum if you want it bigger.
I have the exact Delta 50-760 and went through the Woodcraft lid separator and then the Thien separator and finally happy with the SDD. I modified mine by raising the dust collector up with 1"...
Yep. Mine was among the first batch too but I never had any problem with any of my other Festool sanders so I did not even think about testing until I saw one of the video on Youtube about the sander...
Great. Now turn it on and make sure it is not jumpy or jerky out of the box like mine. I sent mine to Festool 2 weeks ago for repair and should get it back tomorrow or Monday.
Good luck.
Mike
I am using this http://www.homedepot.com/p/Home-Accents-Holiday-Indoor-Outdoor-Wireless-Remote-Control-Kit-RC-017-3/202353566 for my Delta 50-760 dust collector for the past 2 months with no...
Nice shop Hoang. I wish they build house with basement like that in Socal.
My Costco has this CAT rechargeable LED work light for $30. The dimension is about 5x7 an 2" thick. Unlike the syslite, this work light cannot be mounted on a tripod but outputs more light than my...
I think it's an Incra Miter 2000.
http://www.woodpeck.com/incramiter2k.html
There is a link to download the manual from the link above.
Mike
I have CT26 and CT Mini along with 4 of their sanders, routers, dominos, MFT, TS55...I had the Ridgid, ShopVac before but once you get one of the dust extractor, you will think the Ridgids or...
I am using this hose from Home Depot on my Dewalt CMS
http://www.homedepot.com/p/RIDGID-10-ft-Pro-Grade-Universal-Wet-Dry-Vacuum-Hose-Kit-VT2570/100375877
Mike
This is what I got for my SawStop from HD
http://www.homedepot.com/p/Leviton-20-Amp-Single-Outlet-Light-Almond-R56-05821-0TS/202066679
Hi Hoang,
I have the same SawStop with the same bad habit and installed the Wixey DRO because I want to to back to previous marks. With the Wixey, you may become a little anal about the measurement...
Here's mine. I had to stagger the parallel clamps due to limited wall space.
Mike
334252334254334255
When I bought my TS55, I knew that I need to cut a lot of 5x5 baltic birch so I got the 75" in addition to the 55" and connect them if I need to cut 96" long.
Mike
There are 2 problems with the way I use the Festool track saw with this OTT. 1st, the knobs may interfere with the floor when I cut sheet good on the floor on top of the foam and the 2nd is I can't...
I called SS regarding my Oslun dado stack few years ago and they said they don't recommend it using as full stack. But I only need to use it as 3/8" so I used it anyways and it's no problem at all. ...
I bought full extension from Woodworker's Hardware. 10" slides should be less than $4 a pair.
Mike
I only cut dado using dado blades a total of 3 times on 3/4" plywood and I cut it in 2 passes because I have the Wixey DRO installed on my table saw. First I cut the dado with 1/2" stack and then...
I have 8 REVOs ranging from 24, 31, 40" and like them a lot. I also have the Jet and like them too. Woodcraft, International Tool Corp and some other online retailers will have these Jet clamps at...
I used General Finishes White Undercoat as primer and General Finishes White Poly as top coat and liked it so much I painted entire garage cabinets.
Mike
Last year I built my entire garage cabinets and want to minimize the cost to a minimum so I used poplar for rails and stiles with 1/4 MDF for the panel. I used General Finishes White Poly as top...
I use Ridge Carbide TS2000 and 5 out of the 40 teeth are flat.
Mike