Search:

For starters, I have searched extensively and not found but one topic similar (yet no resolve).

Running Legend 36EXT 60watt. Note: Just changed Air Assist Solenoid and Cleaned X Axis motor due to...

Ok, so here is a new one. While I'm still a newbie (right around 1,000 items marked), I have yet to experience this. So pretty simple cermark on stainless Rtic cups. I have completed many with little...

Keith, I'm not familiar with the term "Scan Gap"... I think that I can guess... Would "dithering" be a concept? Or when you say "upload design", i'm not sure what I would change in the design for...

I know this has been discussed several times, but I've got follow up questions to some of the answers I've found...
My art is through CorelDraw X6. Mostly raster designs
Laser is a 60W Epilog...

Ok, so I've tried searching posts but unable to find a decent solution.

I have an order of laser marking hundreds of 1.5" diameter, stainless caps, on the side. The rotary attachment is not much...

Thanks for all the valuable input! I agree about the lines. I use a soft bristle tooth brush to try and clean up. I will admit that I was nervous to leave scratches and/or start to remove too much...

After a great amount of reading and subsequent experiments, I came to a happy spot on laser marking some Brass Compasses for a customer. I felt I'd share, so that anyone in my situation might...