Take a look at the Mr. Sawdust Book on radial arm saws. He has plans for a table top that has worked out well for me.
Type: Posts; User: Joshua O Lilburn; Keyword(s):
Take a look at the Mr. Sawdust Book on radial arm saws. He has plans for a table top that has worked out well for me.
I have a delta/rockwell 37-220. Mine is a 1964 model. As Rod said it does not have Jackscrews but it is not difficult to set up without them. Takes me about 15-30 minutes to change knives. I am...
I did it with the blade installed. But you can't have the coin in the path of air that gets pushed by the blade.
Nickle test or penny test. Stand a nickle and or a penny on edge on the saw. turn the saw on and then off to see if they stay standing.
Sorry I am not sure. I have been reluctant to change them out as of yet. The saw runs smooth and passes the nickle and penny test. I kind of figure if it is not broken why fix it at this point. I...
the delta serial numbers are under the Machine Number tab
and
pick the Wiki Knowledge base
Yes you got it right. your serial number falls between EI-209 and EP-5295 making your saw a 1970.
I have a 34-450 a couple years newer
1970ei-209-ep-5295
I am placing an order today with PA Lumber/ Mike Morgan. It will be shipped to Northern NJ Oak Ridge to be exact. If you are interested in getting your wood shipped with mine It will reduce the...
Is there any reason not to mount the baffle to the separtor ring similar to the trash can separation design using round bar stock?
here is a link
http://www.sawmillcreek.org/showthread.php?t=80701
Something I need to do to my Jet DC-1182
I bought the CMT Precision set.
http://www.amazon.com/CMT-230-024-08-Tooth-Precision-Blade/dp/B000P4LR7Q/ref=pd_bbs_sr_2?ie=UTF8&s=hi&qid=1218727748&sr=8-2
for about $10 cheaper then they...
I just picked up a used Jet DC-1182. A little dirty but in good working order. 2hp 120/240 motor with the original bags etc. Does anyone know what Micron the bags are rated at? Any suggestions with...
I just built a Mr Sawdust table for a very similar saw mine is Model #113.23100. The Main table is 19" x 40" the rear table is 5 1/8" x 40" and the tabel spacer is 2" x 40" OWWM has the manual for my...