All,
I want to join some 1/2 inch Baltic Birch to 3/4 inch face frames. I used the mini jig set up at 1/2 inch and the 1 inch Kreg screw splits out my face frame. Any suggestions where I may of...
Type: Posts; User: Paul Williams 53072; Keyword(s):
All,
I want to join some 1/2 inch Baltic Birch to 3/4 inch face frames. I used the mini jig set up at 1/2 inch and the 1 inch Kreg screw splits out my face frame. Any suggestions where I may of...
Guys,
What a timely thread. I am entertaining purchasing an upper and lower DeWalt roll around tool box from HD as the price is right. Ugly yellow though!!!
I believe this tool box combo is...
Yep,
Hear you loud and clear!
Paul
Thanks guys! I have one room done including door casings and baseboards. It really helps to have a patient wife and a great wood mill close by to get my rough stock. I have them rough mill the...
Guys,
Great news. The stain wasn't very dry and I was able to coax it off the wood really well with elbow grease and a soft rag soaked in MS. Afterwards, I let it stand and coated with Arm R...
Maybe applying Arm R Seal, wiping, dabing and blending may work to achieve my end in lightening the heavier topcoat? It may be less invasive than the MS and wiping? The first coat that was applied...
Yes,
She likes to help. It was a project for her too!!! I think the first coat of gel may of sealed the wood enough to make the clean up of the excessive stain a little more doable. Or at least I...
I saw the pops hanging up right away!!! I do the same thing with my large scale props! Seems a common theme with Model aviation enthusiasts and woodworking. I need a trailer to store my larger...
It has been on a couple of days. However, it is the second coat over a much lighter coat that had already sealed the wood to a much lighter finish. My wife tried to "doctor" up the stain with a...
Guys,
I recently applied a coat of General Finishes Gel stain to a project I am working on which is constructed of QWO. I am unhappy that the color seems to be "too" dark. Is there a way to...
Derek
I am trying to use the existing equip at 110v. It seems these gap measures leave little choice on the piping end. The 5 inch inlet is crazy it has a six inch port that goes to the blower...
I will be using a 1-1/2 HP 3450 RPM motor that came standard with the Steel City unit. When I purchased it, that system was rated at 1200 CFM. I am sure I will take a hit on CFM, but how much is up...
I know this thread is about a year old, but I am in the process of embarking on a similar pursuit. I am in the process of converting my 1-1/2Hp Steel City dust collector into a 2 stage system using a...
Rollie is right on. You need a set of normally open mechanical auxiliary contacts. These contacts mount on the 3 phase motor starter and have the "hot" leg of the circuit your dust collector is on...
Hi guys. I just picked up the small plastic pail dust deputy and am looking for pictures of other portable shop vac systems that guys have put together in one unit. I have an extra set of caster I am...
I just picked up one of the 10-321's and have to say for $420 bucks not a bad deal for me. As stated above, I am part of the target market whom was wanting to replace an older bench top model which...
Sweats, Slippers & T-Shirt.
I have used GF's for a while now and am overall very impressed with it. The satin in my estimation is does provide a nice smooth finish with a slight sheen. I apply both stain and sealer with a...
Yeah for your fantasy shop one can not forget to get the clamps! Obtaining an ample supply of these seemingly mundain woodworking accessories can eat up a small fortune in a hurry. :D
I am planning on building an outfeed table. I would like for it to have storage drawers and be about 4x8. I plan on framing it with 2by stock. Does anyone have any pictures of something fitting...
I have the 3Hp Steel City Cab Saw with the cast iron tops and it is by far the nicest saw I have owned ever. So if it were me I would wait or maybe consider the unit witht the cast top. Either unit...
Norm used the blumotion slides in his shop built kitchen series. He does a nice job in one of the episodes showing you how to install the slides. A visit to blum.com will help you decide on which...
I feel you can't go wrong with a sheraton, hilton or marriot. However from my business travels holiday inn is about everywhere. Although I might add that many a holiday inn have become quite...
Are these DVD's still available? and if so where from?
Thanks
I was wondering what ever happened to the clever series put on by Chris DeHut. As a kid, I grew up right across the street from him. Seems the DVD's his Company produced are in relative high...