Just going from the O.D. you provided here's a link to the McMaster list of SAE and metric locknuts.
https://www.mcmaster.com/products/spindle-nuts/bearing-nuts~/
Looks like the closest SAE...
Type: Posts; User: Jerry Bruette; Keyword(s):
Just going from the O.D. you provided here's a link to the McMaster list of SAE and metric locknuts.
https://www.mcmaster.com/products/spindle-nuts/bearing-nuts~/
Looks like the closest SAE...
I agree with Brian. Get a long enough chisel and you can get that nut off, it's not too far in the cartridge.
Can you remove the spindle cartridge from the machine so you can work standing at...
You'll be looking for a axial lock nut socket. You'll have to determine the size nut. They have a numerical designation, smaller nuts have lower numbers and larger nuts have bigger numbers. You can...
Hi Tom,
Been busy in the shop all day or I would have sent info sooner.
What you're looking for is a adjustable hook spanner. Here's a link to them at McMaster-Carr....
I Googled the machine parts break down. It looks like you'll be dealing with a deep groove ball bearing on one end and a angular contact bearing on the other end.
All the spindles I've rebuilt...
I've never used one, but I read that a roll pin works well for making screw extractor bits.
Google says to increase the water temperature to 160 to kill the bacteria.
That's not a safe temp. to have, so you may have to temper it some how.
You can get lifting slings here. https://www.mcmaster.com/products/slings/slings~/
Does anyone know of a online span calculator for SYP treated lumber? Something that's easy to use and understand.
I haven't been following the whole thread but checking in once in a while. It's a pretty interesting project you've taken on.
You could gain some mechanical advantage by going with multiple...
Didn't want to hijack the other electrical thread so I'm asking here. I understand the issue with back stabbed outlets not holding up. But what's the difference between the back stabbed outlet...
Well I got the sled dialed in the other day. I used the 5 cut method. I like it because after doing the math it tells me how far and which way to move the fence. I had a little trouble and found out...
I've been using the 5 cut method from William Ng's website. Started with about .033. Was getting distracted with an empty belly that knew it was later than I did. I'll go back at it tomorrow.
How precise do you fellas get with your cross cut sleds?
I'm getting ready to build a cabinet for the lady of the house and thought I'd check my sled. Well I fooled around for a while and I have...
After digging around the interweb I found out that OSHA, IRC, and IBC all have code for ships ladders.
Angle should be 50*-70*, tread depth 5" minimum-6", handrail 12" above stringer and starting...
Dealt with similar ladders for almost 25 years before I retired. Made by a company called Lapeyre. They were ladders to traverse over conveyors. Stamped right on the frame were instructions to go...
Gettin' old, prefer something with wider treads, handrails, and not vertical.
Has anyone here ever built a ships ladder/loft ladder. It's like a staircase only at a steeper angle.
How tall was it, how wide were the treads and what angle was it?
Thinking of using the idea...
We had a fabricator where I used to work that was very skilled at doing this. You have to be very careful not to warp the shaft. He would run a bead the length of the surface being repaired, let it...
Have you had the shaft out of the saw and verified the bad journal? I've seen emergency repairs made with Loctite 635 and a brand called Belzona Molecular Metal. But I don't think these are permanent...
I was told the "documentation fee" came about after 9/11. Has to do with dealer retaining documentation of the sale because of the Homeland Security Act. For all I know they were blowing smoke...
I believe that planned obsolescence was created by capitalists so they could keep making profits instead of a quality product that consumers would prefer. Why do you think the automotive industry...
Your best bet would be to take the rack off and take it to somewhere like Motion Industries. They'll have the gauges to measure the tooth size/teeth per inch and the pressure angle, it could be 14.5...
That's a very nice lathe. I hope it's going to an equally nice new home.
I've never seen a grinding wheel blow up myself, but I've seen pictures it's impressive and scary.
When I was in the Navy our ship was contacted for aid to a civilian commercial ship. A grinding...