Search:

How can I test my Powermatic 3520b inverter to see if it's bad?
It just stopped powering on, There is all zeros on the inverter.

I only have the 180 and love it, on the other side of the grinder is a standard 60 grit if I need to take off a lot of material.

Anyone using Linux to do the Design and Cam?
We have a 4'x8' cnc router in Kre8Now (makerspace) woodshop. Everyone is using Windows, but I only have Linux.
Thanks

Barry,
nice work I saw some similar from a friend in AZ.

Real nice, now just make a lid to fit.

Outstanding work, about how long did it take to complete after turning.

We were in MO riding a four wheeler and came across this Oak Burl. Paul said lets cut that down, don't want it falling across the creek. This was 6 years ago. Here are some of the items I have made....

That's really cool, I can see why it tool a a while.

Jon,
My pm is at 30deg to the wall so I can slide the headstock and still have room to work. My shop is only 9ft wide. It works out for my situation.

Very nice he will love it

I took an old computer chair small took the seat off and added a 16" x 3/4" to it with holes around the outside pvc pipe in the holes. I took out most of the tools so you could see it better.
290229

I have the 3520b and love it, the largest bowl I've turner is 32" oak burl. I would put my money on the robust, was in Wisc. and went to Brent's shop. If you get a chance go tour his shop

I have a 5" faceplate with 3 equally spaced 1/4 - 20 threaded holes about 1/2 in from the outer diameter. Then three 1/4" setscrews with a point ground on one end - leave the points extending out of...

Byron,
maybe you could help them find a new location, like an old warehouse with free parking.

I do one piece at a time finish complete. So I would say 95 percent.

Just mount the whole thing on the lathe and turn a nice large bowl you could then set it on your dinning room table, no other place to put it and you can not sell it.

I would try to cut the trunk...

Outstanding work!

John;
I know a place to put that and we all could use it. The new MakerSpace KRE8NOW.com in Lexington.

My shop is small 24 x 9 1/2, but it is ok by me if I want to use the table saw it's done in the garage or rolled outside on the driveway.
But for turning it's great. The dust collection is in the...

Very nice JD, to bad I have not seen you at the meetings lately, must be two busy doing all this kind of thing.

Have you thought about getting a tap the same as the threads on the lathe spindle and making a wooden faceplate. I do that and it works great.

Baxter,
I like all the things you do, but this one is great, I better not let my better half see it or she will wnat me to make one.

Jack great piece the wood is really cool!.

You will sure be able to turn some nice sphere's, will not even have to make a jig!

Great lathe you will love it, I would love to bring my tools and come to Durango and help you learn to turn! What a great place to live.