Search:

HELP!!!

OK, the back story. I have an x700 redsail laser that has been working wonderfully for the last 6 months.

Today, I turn my wonderful machine on and it begins the setup, moving the aser...

Hi Clark,

Not too sure about the engraving speed, but you have already been a great help.

I will persevere and post if I have any success.


Cheers,

Stuart

Yep, the software seemed to react OK. I (in desperation) even turned the laser off and on again, then re-read the settings.

The new setting was set in the laser according to the software, however,...

Hi Clark,

I have got the laptop hooked up to the laser and I am sending jobs to the laser OK. So the laser and laptop are talking.

I have read the laser settings (then saved them) and changed...

Hi Guys,

I have got the laptop hooked up to the laser and I am sending jobs to the laser OK. So the laser and laptop are talking.

I have read the laser settings (then saved them) and changed...

Hi Jerome,

Missed that bit in my haste. Thanks for the prompt.


Cheers,

Stuart

Hi Clark,

Thanks for the fast reply and thanks for the password.

I have had a look at the software, and the max speed is ste in RDWorks as 1000mm/s (see photo).

334068

The problem must be...

Hi Guys,

Firstly, thanks for all the great info on here, it has been a real help.

Sadly, I have hit something I have not seen on the boards.

I have bought an x700 60W laser from ebay that...

Hi Bill,

I'm just testing what the machine is capable of and the documentation is ok, but not exhaustive. I suspect that 47 colours is the job limit but the documentation does not cover that.

...

After lurking for almost two years, I have taken the plunge and bought an x700, 60W equivalent machine from ebay.


Thanks to the members here, I have been able to setup and get the laser firing...