Search:

I ask the supplier.

You can run shorter boards through any thickness planer if you butt each piece to the previous, or run them on a particle board sled. Certainly cheaper than a 2nd machine!

When a bearing is "on its way out", it starts making noise. Usually through the entire rpm range and often most noisy at full rpm.

This may surprise you then. Gothenburg, 17 June 2020: SKF is making further investments in strengthening its manufacturing footprint in China for ball bearings. The investment is in-line with the...

Nealy every species goes a silver gray color and there will be light surface cracking and erosion. UV rays are the killer, that why houses are painted. Paint blocks the sun longer than anything else.

I just bought a fifth wheel camping trailer and now doing work at the camp. Both repairing and doing some little hobby work. I wouldn't be without the sustainers now.

A blade NEVER has be made to be forced somewhere to cut. Is it cutting fine forward? Then keep running it and don't worry. The internet has instructed people there is only one way to run a blade. How...

You can't discount the belt or pulleys as a possibility.

Please show me the model slide you intend to use, I've never seen a rack and pinion table slide. The wear WILL be inside the slides, not should be. The slides I am talking about is in the video I've...

My comment hasn't influenced anyone yet, so here is someone else describing how these things work. There are no wear surfaces from the top sliding against anything....

I suggest you stretch what you have. Make some shop made veneer and you can have all the book matched you want.

It might be since that looks like 1940 technology they copied. But in my experience, first generation Taiwanese machinery was not know as high quality. All they were was cheap with poor tolerances,...

There is absolutely no need for wear strips. With gear slides, the wear surfaces are on the inside of the slides. There are no rack and pinion slides that I know of. They are either gear slides or...

I must saw different wood, there is no pitch or resin buildup with furniture grade species that I use. I also saw slowly enough that the gullets are fine at carrying the dust away and no clogging.

Technically, the only thing that should be touching the wood is the cutting edge. How does that need lubricant? Doesn't that disappear in the few inch of wood or so? Sawmills can use something to...

Just send him money and have him buy local. Shipping is really expensive!

Im guessing you can buy a much newer machine for what that motor fix is going to cost you. A 42 year old Taiwanese motor is going a real problem!!! You will have to find what factory that actually...

Two seater at two different heights for the wide range of grades and child sizes. There are trenches out the back for clean out, these were never moved. Also a second one for the boys.

Looks like I am wrong. Appears to have a bevel on the inside based on windows in this restoration, but very hard to see. Very slim rails and stiles!...

I'm sorry, I don't recall. This is a nice drawing of old window construction, but not shaker. https://thecraftsmanblog.com/all-about-historic-windows/
519157

The Shakers would not have decorated sash though. Bridal joints, or draw bore mortise and through tenon. The Historical Society I belong to owns a one room country schoolhouse. Still has the original...

Whatever you want to justify is fine, I would have to do an inlay in my shop, or not buy them in the first place. If the supplier was as good as suggested, a wide mouth should be mentioned in the...

How you tell they are backed out from that angle is beyond me. You really think he backed them out after showing the curls? The only showed a tapered curl, and one plane shows an angled iron. The...

Hopefully the wheel has not spun on the bushing and galled the surfaces. Start with penetrating oil or a mixture of transmission fluid and acetone. You might try a few taps with a dead blow mallet...

Incredibly wide mouth on those two planes. Many craftsman would want to add an inlay to bring those up to high quality.