I happen to do a lot of my work in Autocad. Gave Corell a telephone call, after the surprizing shift came up. Corel will bring in the lines, but that is about the end there. It distorts along the X...
Type: Posts; User: william kaminsky; Keyword(s):
I happen to do a lot of my work in Autocad. Gave Corell a telephone call, after the surprizing shift came up. Corel will bring in the lines, but that is about the end there. It distorts along the X...
I do not know how true, but was told via the noted industry telephone number that Depron when hot (like during a building fire) will emit noxious fumes, that can take out a person, unless they are...
According to some industry spokesperson located in vicinity of Glendora, is currently illegal to import any Depron as full sized sheets now. Had been used for underlayment, and repair of existing is...
I think You and I go to same shows, but do not know the intepretation of OUTSTANDING. Most are pretty bland.
How often have you heard a vendor say "we got a new product here that will save you a...
Lisa...
I do not find too many of the retailers intersted into refreshing the pot of sales. They go along the same old lines over and over again, they all say "We need new blood (new sales)" but...
Don't know of exactly which type of font you need, but about two years ago (or more) was a question raised at one of the flying model forums, asking for such. People knew numerous locations near...
I tried the automotive gasket market years ago. Found that the end user got the gasket with some "suspect" added on. They suspected that theirown equipment was distorted or warped, and that my gasket...
Am confused here....
How do you go about focusing about 1/2 way through the material then as you mentioned?
Would this have to be done on 5mm stock, 3mm stock, and 2.5 mm stock then?
Would...
Your results sounds about right to me. Have done this dozens of times on a friends machine. and back a good ten years ago got the same old results that you are experienceing now.
Number one, 50...
Oh, didn't we tell you?
What you got is 240 volt single phase AC power. What you really need is 240-440 volt three phase AC power to run things.
How much additional is that going to cost me...
Are you in the picture framing business then?
I noticed two new shops opened up here locally in past three months. Never gave them a second thought, but maybe I ought to see what then they are...
Naww...
We have wandering agents for the city.
They are looking out the windows of their van for any sort of violations.
Van got the neighbor due to his unused extra building out back of...
Hello Tim;
Am located in south Coltan Calif. S.B. County.
I know of a couple of local laser owners that work out of their garage right now. The city has an ordinance that essentially says NO...
Carol brought up something interesting to me..
Follow along here.
I don't have an immediate need for a big laser right now, as most of the work I do involves prototyping. There is such a firm...
I think many of use need more infmation here...
Is this common corrugated cardboard?
Flat stuff?
Compressed (hardboard) style of cardboard?
Exterior or surface color?
I think what Dave. G. mentioned is same as for my experience too. 'least in part.
For I found that near zero of the Imported laser machines or software will work with an Autocad based system....
Am familiar with that one you noted. But not the one I was thinking about. It is weeks away, and to be held someplace in Los Angeles area, near to their Convention Center.
There are some dates...
Isn't there a convention coming up in August or possibly September in the Los Angeles area that primarily shows off Laser etching and cutting equipment?
Heard of it, or know when it is?
Wm.
Anthony...
Did they tell you that Temecula is about 20 degrees warmer than the shore areas? I am north of Rancho California, up I-215 by the county line, and know already we have to do all...
Well, 30 watt on 1/8" plywood is sort of marginal. Have used 50-100 watt and got charred edges. That was running speed very slow too.
To get through in one shot is not always easy. Best thing is...
Several months ago, I tried out one of the Chinese laser systems for cutting works done via Autocad. Had to have the Autocad software loaded up, then went to Print/plot to cut the work. If you do not...
Friend of mine has a 100-120 watt Coherant and on such stuff has to run the laser full power, and very, very slow. Open up all doors and windows too for it certainly smokes up the place.
Wm.
OK, I got a name for a certain font that I need to use.
But, as old folks in the printing biz so often did they alter the font (or not) and then make up a whole new name for it. I got one...
CorelDraw will accept directly Autocad drawing without going to some DXF translator. Thus seldom if ever now go to a DXF type of drawing. As I work in DWG format, is simplier for me to stay in that...
You think M-S will market a home edition (standard Vista) alongside of a Office edition (Windows 7) then? A version with all the bells and whistles (like Vista), and a version that works on laptops...