Nice set, Sign me up.
Dave
Type: Posts; User: Dave Spitzer; Keyword(s):
Nice set, Sign me up.
Dave
I'm in, Thanks
Dave
Sign me up!
Thanks
Dave
Dan,
I agree, I feel the bottom line (and I believe you mentioned earlier) is a person wanting to cut metals need's to do some research.
Anyone interested in cutting metals with a Co2 lasermay want to do more research; this link may help answer many questions:...
Ernie,
The castcnc is a spinoff from the original Joe's 4x4 hybid. The castcnc replaced the MDF carriages in Joe's hybrid build with cast aluminum parts, it increased the stiffness in the machine...
I have a castcnc like Mike's but I purchased this tool (pro-tram) to tram with, works well. http://www.edgetechnologyproducts.com/products.html
Dave
Randy
Bob Cad V21 should have the CAM software included, AutoCad and Scethup, you will need to export the file as a .DXF into a CAM program such as CAMBAM,or any of the following Vectric software...
Mike,
I know you use the modbus protocol for your spindle speedcontrol, however, unless I'm missing something here I can't see any benefitover an analog signal in this application. The modbus...
Ken,
A little expensive but I feel worth it just to have control and vissual readings right next to me during setup. $250.00 pendent + $15.00 shipping, US funds.
Dave
Bryan,
I'm not sure how your machine is wired, or the make and model of the break out board, CAMaster should be able to help with that part. In the mean time you should check all ground...
Mike,
I believe it's just a keyboard emulator & serial interface (for DRO data) connected through a USB port. More info at website: http://cncpendant.ru/en/shuttlerustm32.html
Dave
I came across this on the cnczone, this pendent comes from Russia. I placed my order in mid April, (no money required up front until product ships) Andrey, builds each pendent himself. The quality...
George,
Thanks! On the left side of the box(see a blue LED lighted object) is a 4 lb alluminum heat sink and 4" fan that the motor drives are connected to on the inside. on the lower right side...
Thought I would share my rebuilt controller with everyone. It's a bit busy, but I like visual dianostics as much as possible. Using Mach3 as the control software, I have full control of my router...
I believe that a screenset comes down to personal choice and comfort, I've been using MSM for over a year and I find the workflow to be smooth, and that is important to me, from homing, loading...
More info can be found here at http://www.vectric.com/WebSite/Vectric/events/2012/ugm2012/ugm_2012.htm
FYI:
Vectric is having their 2012 user group meeting in Cincinnati this year. October 19th and 20th for anyone that maybe interested.
Dave
Has any one tried MSM (Mach Standard Mill) Pro version screen set? I've been using it for the past several months and have found it to be a very powerful, and easy to use screen set. I Have tried...
Hi,
Just thought I would pass this on, a very nice G-code generator for needed operations in the shop. Can run stand alone or be called from within Mach3, currently for Mill only.
www.d2nc.com...
Thanks Gary, I checked the grub screws but not very good as I missed the grub screw on the X axis motor pulley. A small pain to get to, but it was lose and was causing my problem. All works well...
I have upgraded my Joe's 4x4 to a castcnc. My test run picture 182 came out good (far left), however, test runs today "pictures 183, 184" are not so good. I've checked over belt's and pulley's but I...
I use easycab V9.0, http://www.easycab.com/
Dave
You may find this link of interest. http://www.procamcnc.com.au/cnc-machines-milling/Rack+Vs+Ballscrew
Dave
I've been using X5 for some time without any problems, I also save my work often. Most crash problems can be the cause of other programs doing things (not following Windows rules) and not the fault...