Not sure if this helps, but here is my experience so far:
I use a Capspray 4 stage HVLP sprayer for sealers as well as acrylic enamel automotive paint. The machine is also listed for Latex paint,...
Type: Posts; User: Mike Reinholtz; Keyword(s):
Not sure if this helps, but here is my experience so far:
I use a Capspray 4 stage HVLP sprayer for sealers as well as acrylic enamel automotive paint. The machine is also listed for Latex paint,...
Anyone else look at the two pics in the original post and notice they are identical other than paint? I don't see any difference other than the speed dial location.
Any pictures or comments on accuracy? Please give us more!:D
I rebuilt an older unisaw last fall and went through a similar debate. The newer motors available can run into a problem where they hit the motor cutout on the side of the saw. Some people (like...
The advantage has to do with the type of fan, the 60 lb units generally utilize squirrel cage blowers which can produce more static pressure and pull more air through more restrictive filters.
The...
While it won't charge batteries, I have the older Milwaukee model that has Rockford Fosgate speakers- it sounds fantastic! If you run it off batteries, be warned that all that volume and bass come...
Thanks for the compliments! It's actually fun for me to tear down and rebuild power equipment. Last fall I found a listing on CL for a cabinet shop that was closing, the guy was in his 60s and the...
Matt- I know the feeling on the confusion between the 2 cities, when we closed on the land we recently bought the paperwork had the town written both ways. I decided to google the two and found they...
Sounds like you should be in good shape with a 20A circuit, if you are comfortable with and have an amp clamp I would suggest turning it on and checking the amp draw (preferably on a warm day). If...
I called Laguna and confirmed the Driftmaster to work with my table, they also emailed me the manual. Sounds like a winner!
I have been looking for a bandsaw for quite some time and was very close to pulling the trigger on a Rikon Deluxe 14" when this came up on CL. Ended up getting it for literally next to nothing (the...
I used to have a larger stand-alone router table but replaced it with a cast iron Bench dog extension wing and lift, I'd have to say it was one of the best changes I've made to my garage setup. ...
I have the Festool as well and have been really happy with it. The cuts are ridiculously clean with absolutely no tearout. Currently I work in a 2 car garage, so the option of a table saw with big...
Sorry for not supplying details, here goes- There is a hardware store close to me that started carrying an entire new product line from "exchange-a-blade". They have everything from saw blades to...
Less than a month ago I did the same thing to make room for a larger refrigerator, but rather than using the multimaster I used a track saw. Cut was splinter free and very straight. Unfortunately,...
Wild A** guess
Sounds good to me, thanks for the replies! Just needed a little confirmation before ordering the head.
Thanks again!
A couple months ago I picked up a used Delta/Rockwell 8" Jointer, so far everything has worked great but the knives were pretty dull when I got it and it needs some attention. After the great...
If they are plugging up then they are doing their job. What you need to look at is a filter with more surface area, like a 4" thick filter. If you can get to a grainger, they have 4" filters is...
Alright Matt, you got me motivated to get back to work on mine.
What grit sanding belt did you use for the conveyor? I'm thinking 100 grit but wondered what you used and how well it works.
...
Wow, talk about irresponsible on the part of the show! You would think with the litigation-nation we live in they would know better.
Thanks Chip, that's exactly what I was looking for! I like the idea of the micro adjust for the rear drum height, I will be sure to add that in. I've been looking for quite some time at the various...
Matt Armstrong's long and impressive thread of his home made drum sander has me motivated to get back to work on mine. I started gathering materials about a year ago and put it off to complete other...
Look fantastic, I've been meaning to get to work on mine but so far haven't gotten any further than collecting parts. How is performance? How did you attach the MDF disks to the shaft? Just use...
I have a CI benchdog extension with the Benchdog lift, couldn't be happier. It's mounted to a 1940s Unisaw, with all that weight and a Milwaukee 5625 router it feels very similar to my shaper table,...