Search:

I have never had a problem with WB and wondered about at first. I have also tried other Watco colors on cherry but "natural is my favorite. I've also used it on oak and maple depending on what...

Derek, I really like Watco Danish Oil, natural, on cherry. I've used it on many projects, it really pops the color. I have used water borne poly and it works well, my most frequent is spray on...

Cotinus, the smoketree or smoke bush, is a genus of two species of flowering plants in the family Anacardiaceae, closely related to the sumacs. The color is the same as one in our yard.
Alan

How about using a pattern to guide the bearing around the corners?

Todd,
I happen to leave mine plugged in all the time, but I think a charge tank would work fine, sure worth a try if you don't have air plumbed near your machine.
Alan

Todd,
I have the Camaster Stinger 1, 23, Equipped nearly identical to the one you are considering but mine included the recoil. Camaster recommends the counter balance and mine has it. Once you...

I have bought from them several times. Good product, service and delivery.
Alan

John, When I want something like that I go to Google or Bing images and search for what I want. I think you'll find a lot of stuff. You can download the image an make a pattern.

Alan

Silas, I just searches Bing Images for home built casket, and got lots of pix, some look very good. Wish you well with your project.

Alan

If you haven't already, go to the Vectric site and browse the video tutorials. As I recall, several will show how to enter or edit tools in the data base. It isn't difficult and there is a lot of...

They look like for fence extensions for a miter saw.

Alan

Looks like you might have enough room to try two or three pair of opposing wedges driven from opposite sides.

+1 for Timber Mate

You might try a rental store for the tool. First, I would try a couple of wedges under the bearing.

I have the same planer. I have the bed rollers set at table level. I have found that if I send the stock through at an angle it will get little or no snipe. On wider stock I have best luck with a...

Bob,
I would go to Grizzly's site and download one of their 15" planer manuals. It might be very similar to yours.
Alan

Shopsmith has one. Had one years ago and liked it, but don't remember if the mitre slot is standard width or not.

Alan

I had a similar problem with my new Grizzly 15" planer. Just called Grizzly and they sent a new switch right away, no charge.

Gordon, I did exactly what you did, but I later added a router lift. Still felt the need for a second router and bought the DW618 kit, it came with a fixed base and a plunge base, and I later got D...

I mount the flap sanders on an arbor and use a morse taper chuck on my lathe which has variable speed. Works very well for me.

Alan

Jeff,
I'd use a length of 6" well casing with a flange welded on top to fasten mail box and set it in concrete. That would be in keeping with your Fort Knox theme.
Alan

Brian

I have had the Grizzly 20" for 3-4 years and like it, especially the large square table.

Alan

John, I recently purchased the same planer and like it very much. I added a 4" elbow to connect my Jet 1100 DC. It works fine.

I use the sandpaper material used to surface skateboards. It is pertty heavy duty and adheres very well. It has worked very well for me. Available in most sporting goods stores that sell...

Does anyone know of a good quality replacement for the Shop Vac 2 1/2" vacuum hose? The OEM hose has a strong tendancy to kink at the vacumm connection and at the tool connection. Thanks.