I ran a piece of tubing up to the top of the compressor where I mounted the valve. No bending/kicking/etc. I also keep a plastic jug nearby to drain the water into.
Type: Posts; User: bob ware; Keyword(s):
I ran a piece of tubing up to the top of the compressor where I mounted the valve. No bending/kicking/etc. I also keep a plastic jug nearby to drain the water into.
My apologies for not showing the final results of the completed frame after receiving all the great feedback on my questions. I neglected to take any pictures before my daughter took it so these...
Thanks for tips Jim. In the sample I made this morning I used a flat file, but, of course, wood impact was not a factor. I'll most likely use the belt sander method on the real thing.
Jim Tobias -- your brass rod suggestion won out. Thank you for posting the pictures as that sold my bride on the idea. I made up a sample this morning using 1/4" and 5/16" rods in a scrap of the...
Ya'll have given me a lot of great suggestions which I really appreciate. Now to decide which one to use. I like the thought of the splines using contrasting wood -- I have some home dried pecan...
Both good suggestions. I neglected to mention I also have a biscuit tool.
Hello everyone. Been a long time lurking member but very few posts.
I could use your thoughts/suggestions about joining/connecting the corners on a fair sized picture frame I'm making for my...
I don't know if it means we don't HAVE to but I do because I bought hearing protection for my grandson so I not only want to set the example but when he is around he always brings out mine with his. ...
Please count me in.
Can you confirm the Kroil, etc. is actually making it's way between the head and the column? It sounds as though the head is rusted to the column after all those years sitting. How about using that...
It looks like it should fit on the Incra but I just looked over mine (closely, I think) and found nothing resembling that piece. Might it have been 'hiding' there from another tool in the shop??
Mike, thanks for the report. I have one of those heaters so will be contacting Grainger first thing Monday.
What brand did you purchase? I'm considering doing the same for the walls in my metal building workshop.
Check the Delta online manual library --- http://www.deltaportercable.com/ServiceAndSupport/OwnersManuals.aspx