BINGO!!! They do shred, and I cant find them for less than $50 anymore. :eek: :(
Type: Posts; User: Jack Wilson; Keyword(s):
BINGO!!! They do shred, and I cant find them for less than $50 anymore. :eek: :(
BINGO!!! They do shred, and I cant find them for less than $50 anymore. :eek: :(
No, just the read out.
509661
No sir, it does not. It doesn't move while running boards through it, the problem is that the values given for moving the table up or down are arbitrary. For instance, 6.032, (I don't even know what...
i have an old Seco 24" wide belt sander, I'm at least the 3rd owner. There is a digital display that displays the height of the infeed table, but never accurately. If I bring it all the way up and...
I'll be using gear oil, so I should be good then. Thank you!
This is a good point. The one I removed was just Z, but it was so beat up that I thought the seal was just beat to hell. AND, it's not been able to hold oil since I got it, so I have a new gasket on...
This info may be helpful to some so I think I'll pass it along.. There are 3 bearings inside the gear case, you can order them from W&H, (who has just been purchased by the Original Saw Company,...
Tom, thank you for that interesting bit of history! I think it's pretty cool to go back and see how things were constructed, before my time.
I'm in a little town near Letchworth state park, halfway between Rochester and Buffalo.
Dan, that link is kind of a dead end I think.
I tried before I post, came up dry.
Hey Richard, Thanks for the info. I called them before I bought mine, I believe you have the "Model 7", I was quoted $2400, or $2700, doesn't make much difference, I wasn't going to spend that much....
Does ANYONE have an owner/users manual for an original Porter Cable or Rockwell 521 stair layout template? I've just acquired an old one, (obviously, since they haven't been made in years). I would...
I have a shaper set up with 2 cutters, I use a home made sled, 1/4" steel plate bolted to a miter gauge, and a toggle clamp to secure the work piece. I have a Minimax J/P with a mortising attachment...
I am running a Wood Slicer from Highland Woodworking, $45 I think. I am VERY happy with the performance. I have a Grizzly G0513, 17" saw.
For the record, I was wrong about the type of amonia I have, it is aqua ammonia, I have 5 gallons of it, couldn't get a fair price on 1 gallon but found a great deal for a 5 gallon container @ 29%...
You are right about the type of ammonia, it IS "aqua ammonia", I edited my original post to reflect the correct information. Thanks Rick.
I hope this is the right forum to be in for this question. I am planning to fume some small white oak boxes, quite a few of them hopefully. I have 29% aqua ammonia and I am wondering if I can make it...
OK, I really had'nt considered clean up. I have to clean my airless sprayers, but I leave my pressure pot with contact adhesive set-up for months between uses and thats all fine, in fact I have never...
I have a pressure system, I also have two airless sprayers for large painting jobs, usually spraying Kilz after fires, but what I am looking for at this point is something small and of the HPLV...
I am thinking of getting an HVLP system, but have noticed that all the guns come with a cup, over or under. Does any one sell an HVLP system that has 2 hoses, so that the cup is NOT attached to the...
I'm with Dan, just jump off that one and add a 2nd near the compressor. Shut off the compressor when you run the lathe, no problems. If there is a problem, well, thats what the breaker is for. I...
Well, with all this advice, I am trying hard to see what I CAN get for $15,000, going higher really isn't an option right now. Buying my 2nd machine first is a great idea, but just not practical at...
Thanks for the advice, everyone seems to be on the same page so I guess thats pretty solid. I do wonder what you all mean when you talk about slower machine/faster machine... are you talking about...