The reunion will be here shortly so threw these together as the prizes for the winner of the corn hole tournament we have each year. Made from 2x material from the big box store and some baltiic...
Type: Posts; User: Robert Horky; Keyword(s):
The reunion will be here shortly so threw these together as the prizes for the winner of the corn hole tournament we have each year. Made from 2x material from the big box store and some baltiic...
Yonak, nice job. It is good to get 'outside' the box once and a while.
Josh, PM me with your email. I have SU file and a PDF file.
Yonak, you are correct as this one will jam once in a while. A firm shaking normally handles it. I think I should have put a ramp on the trailing edge of the slot in the gear. This would force the...
I have access to a CNC so I have been learning/playing. Saw this candy dispenser and just had to try one. Cut the parts out of an MDF sheet. When clamped I noticed the gear did not spin freely...
This one is done and delivered. Goes with the bed I made earlier.
http://www.sawmillcreek.org/showthread.php?252141-2nd-bed-for-the-Grandaughter-idea-to-reality&highlight=
371433 371434 371435...
A fun little project for the grand daughter. Galvanized sheet stock glued to 1/4" ply then painted with primer and chalk paint. White oak frame and cabinet stained with Classic Grey from Minwax. ...
Hopefully fixed. They all worked for me but I did edit.
2nd bed for Granddaughter; idea to reality
So here is the story. With #2 on the way, #1 needs to have a new bed and depart from the crib (posted here as well). So, the...
Thanks for the comments. Jay and Patrick, here is a closer shot of the buffet bottom shelves and curved pieces. The curves are bent wood laminations as my steam bending attempts did not work .. my...
Lots of hours but true enjoyment and learned some new techniques.
Solid walnut, shop made walnut veneers, bent wood laminations, veneered bending plywood, dovetails, doweled joints, dovetail drawer...
Mike, here is the one I built. Now in use for a month. Rock solid. I only plan on a 2-in-1 ... but can always come up with some type of slide on side rail. I used knock down hardware to hold the...
This one now joins the two end tables (one can be seen in the second pic) and the sofa table. Now just one more to go, a square end table, and the set will be complete.
...
almost there .. and will post a thread in the completed projects in the next few days ...
256697256698 walnut coffee table ... and snuck in a bandsaw box ...
I am in for sure .. thanks for the opportunity.
Finish: one coat 1:1 danish oil; mineral spirits, six coats 1:1:1 danish oil: gloss poly; mineral spirits
Here are the end tables. Made two of them 255715255713255714
Completed, delivered and now sharing space with the two end tabled delivered earlier. Now only a coffee table and one more end table and the daughter's table set will be complete.
Materials:...
Here is what I found on Abranet .. comes in many grits.
http://mirka-online.com/mirka-specialty-abrasives/mirka-abranet-1/mirka-abranet-1.html
Anthony, not sure if this is fancy enough but built from Cherry and Walnut ... hope it helps.
241387241388241389241390241391241392
Bill, I suggest you do a google search on mission style computer desks. You will find several links that have ones quite similar to the one you are looking at. Maybe close enough to get you started...
202225202229202228202226202227
Not all projects have to be big, complicated and grandios. Sometimes you have to do some fun ones.
Fun little project made for the family reunion. Made two for...
This was a totally fun project … from the wood pickup 198274 to the final assembly 198273. Table is made from Jatoba with some Ebony inlays for accent and an Olive Wood veneer on the top of the...
182237Used up a bunch of plywood cutoffs to pull together this jig. Will mortise vertically mounted pieces182238, horizontally mounted pieces 182240and do compound angle mortises182242. Has...
I agree, an evaluation would be great. I have come to find out that the spiral cutterhead in the std. Grizzly planer is not the same as the H series or the T series or the Byrd series they sell for...
anyone share some thoughts on the Grizzly spiral cutterhead vs. the Byrd version? pros/cons?