15 second for capacitors to recharge as I was told from tech support I also leave my machine plugged in and if not turning, more than a month I give it a little love and run it for a short time....
Type: Posts; User: Gerald Wervey; Keyword(s):
15 second for capacitors to recharge as I was told from tech support I also leave my machine plugged in and if not turning, more than a month I give it a little love and run it for a short time....
Here might be the reason that you don't see a better system on the underside of the table. The thought that I come up with is that the platen can be tilted making difficult to put a dust port in...
There is more than one variable, you mention the wood is maple so that might not soak it in as fast as other woods. so it may require more than one coat. I use a mustard bottle and apply a liberal...
Cut it right down the center you might waste some wood but it will give you best results when it comes to the grain and color the rest I would cut square and the anchor seal then set aside for a...
2002 Chevy Venture will fit several sheets of plywood with the rear hatch closed. Seats need to come forward a bit but for a short trip it's okay. Any thing more than that out comes the trailer.
...
I have a counter top behind the lathe and the lathe is 24'', width of my matt away from kickboard. Plenty of room to walk around and plenty of room for tools on the counter. Turning out to the center...
Bill congratulation on the cover shot. But more importantly is that you have helped so many people and is my guess that you will continue too do so. I have been a recipient of your help and it was...
When you turn a bowl twice so that you get one bowl. Jerry
I' give it a try one thing that do is put a spiral on with a sharpie marker going with a very slow speed on the lathe moving from left to right. Then with the lathe running same speed same direction...
The designs on them are really nice. I do a lot of tops but they lack the swirls that you have care to share how you made that pattern. Jerry
You are going to like your new lathe a LOT. the big difference that you are going to find is that if the readout says x speed it stays there even when you lean into it. some of the smaller lathes can...
Very nice great addition in the center if the vase. I know you said several months for the drying of the bowl But do you recall how long that time was, less or more than a years time anchor seal...
Empty one gallon paint can for all your used finishing rags just put them in at the end of what ever phase of the project that you are on could save your shop house from burning down. Jerry
rags / paper towels An empty one gallon paint can cleaned out works perfect for putting in soiled paper towels that might go up in flames including your shop cheap way to possibly save it. cost free....
Bob Its the nut that keeps moving where in the TS should it be tightened to the quill end or the handle end?
Jerry
I have had it aprt several times, the tailstock was cast with a stud rail in it so that isn't the problem. What is happening is the nut that should keep the quill moving forward is coming out the...
I have an old Delta 1940's vintageworks well except for last week the tailstock drive screw stopworking the way it should. Here is the problem the tailstock does notapply any pressure onto the wood...