hi there
I make my own I use small pieces of the acrylic then dissolve it in aceton until its totally dissolved like coffee cream.
maybe this helps
greetings
waltfl
Type: Posts; User: walter hofmann; Keyword(s):
hi there
I make my own I use small pieces of the acrylic then dissolve it in aceton until its totally dissolved like coffee cream.
maybe this helps
greetings
waltfl
hi all
here are a few picture from my workshop after downsizing from 1200SF to 400SF garage .
its all stuffed but all machines can be used . for cooling I use a 22000 BTU window AC what is also ...
I got condensation on my tube all the time because of the ambient temp of around 36 C and like I said my water temperature runs between 15 and 20 C. my cheap tube ( ebay $ 160) last around 1,300...
40W water between 15 and 20 C
I use mostly " acrylite 2.5mm" I get them for free from my local ACE hardware store they have every week quite a lot of cutoffs and I get them for free.
ones in a while I give the girls something I...
hi guys
its a matter of opinion but this was not the question if I remember right it was regards to engraving bamboo.
I just try to help out glen.
the design is not in question.
greetings
waltfl
hi there
I can not open the corel file because I got X5 but why don't you group all and send it to the laser that's how I do it but I got lasercad not lasercut.
for the acrylic I get left over...
maybe this helps
I am using the scrap pieces from the flooring installer of bamboo I get them for free and the good part is that the surface is already sealed.
they give318609318610 it for free....
I would replace the tube first because that's the part what goes first seldom the powersupply and the controller has not much to do if the power goes down.
greetings
waltfl
ground is required for both operation and safety. only if the outlets have a real ground and not connected to the neutral. the best is a extra ground rod about 6 feet long in the soil or second best...
I am using granite 2 part epoxy glue for granite maybe a countertop shop near you has some for you or you can buy them online ebay or so like this
...
yes you can if you buy the acrylic version at HD, mostly called " acrylit"
greetings
hi all
here are two picture from my igloo but they projecting different scenes in the whole room walls and ceiling
with polar bear or stars
greetings
waltfl
hi all
my experience with laser tubes is that the tubes are made at "north branch" are the best I have two over three years and both lasted way over 2.000 hours with power out put new close to 45 W...
WOW
10.000 SF is a lot, can you not enclose your area to separate it a bit from the remaining, maybe thick tarp . then a Big window AC ( must be vented to the outside) and a industrial fan.
but be...
hi junioe
they are way to expensive. I pay for 5m roll super bright 5050 LED strips only $ 9.00 including shipping.
greetings
waltfl
hi gozzie
I buy mostly rolls of the LED strips from the cheapest seller on ebay, because they all from the same manufacturer.
right now I use the new remote control for the strips and they work...
hi all
the picture is the 2.4mm acrylate what I get left overs from ACE hardware store for free. the LED light stand are three pieces of different wood ( red cedar and bass wood) they are cut to...
they are very nice
here are a few of my nightlights, they are all free standing with120V adapter
greetings
waltfl
hi there
first I am cutting up to 6mm black cherry even knotted and black walnut with my 40w machine 70% power and 6to 9mm/s speed and no problem,
there is something wrong with his machine...
hi
did you check if the AC is on the HV powersupply? next step would be to open the HV powersupply and look in the front somewhere there is a glass or ceramic fuse test it if it is blown. be...
hi
I use the leather protection spray what work pretty good to especially an natural tan leather
greetings
waltfl
I wish everybody a merry Christmas and a happy new year
waltfl
302055
Hi all
does anybody know what font this is?
greetings
waltfl
hi there
send me a PM with your email and I can send you a few picture and files
greetings
waltfl