Count me in. Dick B.
Type: Posts; User: Dick Bringhurst; Keyword(s):
Count me in. Dick B.
Last time I was in your spot I bought a trailer hitch for my truck, rented a trailer (oneway) and delivered. Had a nice vacation (a short one) and gained a hitch. The cost was slightly less than...
Interesting, Only one mention of PC. Dick B.
Count me in please. Digk B.
Please count me in. Dick B.
Count me in. Dick B.
I'm not disappointed. I say that's great. I'm happy for you. As far as cutting the pieces yourself, the quality of the cut is more dependent on the blade you use and how you guide the saw. Get a...
It's been my experience the BLOG will not guarrentee accuracy. Also their blade leaves something to be desired. A hatchet would be better. Dick B.
V-2 is the the type I have.
Robert, I don't think you can go wrong with the PRL models. I first had a Jessem Rout-R-Lift. I didn't like it because of "lash" in the height adjusting system. I believe that has been corrected...
the 35mm bit should NOT have a center spur, it can go all the way thru depending on the depth of the wood. Test on scrap. Dick B.
I used one for many years with acceptable results. The problem I had happen fairly frequently was the presure it took to raise the mortising chisel out of the mortise. A drill press is designed to...
I think that's the easiest solution if the thickness you end up with is acceptable. Dick B.
Toss my hat in the ring. Dick B.
The quickest way I've found to find where it came from is to pick it up and throw it away. You will usually have your answer the day after your trash pick up.
If you use either of these magnetic type setters and you have carbide blades make sure the magnets will work on carbide. I think it takes a rare earth magnet to work with carbide. Dick B.
I don't own a 621 but it might be possible to put a nut on the adjuster to act as a Jam Nut. Dick B.
I just set up a roller stand on the output side. Dick B.
You can buy cans of compressed air similar to a rattlle can of paint. I use it to blow out my computer periodicly. Dick B.
Count me in please. Dick B.
Some #1 but mostly #3. All 20 amp. Dick B.
Thanks Mr. Kerry. Count me in. Dick B.
Bosch -- got three -- Love 'em. Dick B.
The latest Delta jig can be adjusted for the miter slot distance to the blade. Dick B.
OK I'll bite. For what application with crown molding? Dick B.