I picked through some lumber for students. Machined some steel, cleaned up a few my classrooms. And marked a few projects. And replaced a saw stop break. I would love to add pictures, I will try to...
Type: Posts; User: Matt Mattingley; Keyword(s):
I picked through some lumber for students. Machined some steel, cleaned up a few my classrooms. And marked a few projects. And replaced a saw stop break. I would love to add pictures, I will try to...
Just go away, is somewhat harsh. We call this at school bullying.
Sam, you are a gentleman. Different strokes for different folks. This community can go where ever it wants to go and all can...
There are many lineups starting from $50-$3000. Two of the simplest integrated togather are schlage keyless entry with a child magnetic cupboard door stop. This will run you about $250
The...
If you have good dust collection, Put A decent smoke detector in your shop. This is the first step for many reasons . If you’re fine particle count kicks the smoke off... you might want to invest...
Here in Canada change adds up really fast if you are a cash person. Our smallest bill is a 5. A few years ago we got rid of the penny. About 25 years ago we got rid of the two dollar bill and...
Jim I have the silent cutter head... not Xylent. I am not sure it is just as great as Tersa head...but it cuts wood nicely.
Your post is radical on the majority of members. I've helped out dozens of member (and contributors on this site) and others. With no collusion. The funny thing is I used to use this site for,...
Congratulations on the new vehicle. The pictures show up pretty shitty on my side of the 30 foot tall Mexican fence. But enjoy your new ride. You definitely got a ride that will trump most others!
Does it have any relevance where the location of the servers feed from??? Are you making server changes??? Are you going to a cloud type server that is offsite???
I remember photo bucket, Had similar problems...
They are identical.
Rod is a pretty good mate. He is one of the good guys. When time allows I try to meet up with him for breakfast 6-12 times a year.
And here’s a little more.
...
I don’t why I can’t see the pictures i’ve posted. The software is giving me a kickback....
So here’s the update. It went out for casting the middle of December and I picked up January 30th. January 31st I took on a pretty big contract that lasted till April 26th.
So... the castings have...
I set Guide pins, gears, sprockets and plates... quite often. We call it an interference fit. We always freeze or heat. Any motors we use Loctite 620 and no freezing. Just a little bit of heat will...
in most three wire control situations there will be a jumper to the electro magnet, which is always hot. To complete the circuit the stop button (which is normally closed, NC) transfers power to the...
If you're absolutely sure that there is no grub screw! Spray it with WD-40 or (brake fluid) for a couple days, then put the torch to it. Many fitters use Loctite as a setting compound. Only heat will...
Allen if you truly want to compare where Merv enters into Hepa this starts at 17-20 merv.This is 99.3 to 99.7!
merv 16 filter is cleaner than most outside air. I use Merv 10 filters in my home...
Circulation is key. It is a waste of time to put a filter in the middle of a room and ask it to catch something without circulation. As well heat naturally rises with airborne dust. I work closely...
The sheets are galvanized prior to sheer and form. Any exposed edges or scratches will take on rust.... this is normal! Metal having a high resistance to temperature change is prone to oxidization....
If the coil is 220-240 V it will still operate on single phase 240 V. The coil inside the contactor/motor starter is only single phase. You will have to show a picture of it to let us see if it is...
Yes Bill, that is very important in a splash lube piston. Some higher end compressors have pressurized lubricators. Keep in mind not all air compressors are equal.
If your modifying a...
A few summers ago, I built two compressors from scratch. My goal was quiet quiet quiet. I did a fair amount of research. California air and Rolair had the top ratings for small air compressors. But,...
Maybe I am off a little bit. I have a 6 inch main spiral duct branching off to a 5 inch blast gate. I have a 5 inch flex hose that clamps the OD of 4 inch PVC 90° elbow. The inside of that elbow I...
I pretty much agree with Dave here.
At one point in time, I too had a 1.5 hp 13" 2 3/4" tall blower. I retooled and rebuilt. With my 5 hp I do believe I'm pulling 1200 CFM through four-inch duct....
Thanks Frederick! I don't expect anybody to walk a day in my shoes. They probably quit like the 3 teachers before me. Burnout rate is pretty high, especially with the experienced old school elderly...