Search:

I'm almost finished building a new assembly/outfeed table and just need to install drawers on the long side of the table. I have a center divider in the table, with 2 plywood boxes - each box...

Hey Tony, thanks for the offer to assist in the diagnosis. I only have a voltage meter, but not opposed to getting a multi meter. I have 2 wiring diagrams; The original manual that came with the...

I did replace both the start capacitor and the run capacitor late last year - that didn't help. Both safety switches have been bypassed and new capacitors installed and still not working. Felder...

Yes, checked all safety switches; bypassed the door switch and the brake switch

I think I will go ahead and have Felder do the work. They are estimating a maximum of $965.00 for labor, including travel (1 hour 20 minutes from me). A new bandsaw would be over twice the price...

I purchased a Felder FB600 Bandsaw, new, in 2011. Since that time, it has seen a few projects for a total of +/- 4 or 5 hours run time at the most. It has been a great saw until 2 months ago when I...

Jointer is sold, Planer still available

I have a Powermatic 12" jointer model 1285--HD with helical cutterhead in great shape and a Powermatic 15" planer model #15HH with Byrd shelix cutterhead, also in great shape. Hobby use only....

Looking to get opinions on what a fair price to sell a Powermatic model 1285, 12" helical head jointer and a Powermatic 15HH, 15" planer with Byrd head. Both in excellent condition, hobby use. Not...

18mm Russian Baltic Birch 4' x 8' 13 ply at Russell Plywood in Wilmington, De, $165.00 per sheet, at least it was in late November of 2022494070

Again, many thanks for all of the ideas and suggestions! I think I am going to remove the center legs, keep a 4" overhang on the left and right, top flush at the front (I can still clamp between the...

Very impressive! I too have a Jet 1100 and want to upgrade to a cyclone.

Thanks for the great suggestions! I am going to plan on a 4" overhang for the top on the left and right sides, and the top thickness will be 2 @ 3/4" pieces of Baltic birch, except where the top...

I have a thread posted about t-track in an assembly/outfeed table, so I wanted to start a new thread on my ideas for building an assembly/outfeed table and hopefully get some ideas from fellow...

Just got my new Sawstop ICS set up and want to build a new outfeed table that I can also use for assembly. Searching online, there a quite a few examples of tables with T-tracks set into the top of...

Saw is SOLD

Price drop.....$1200.00

3 HP single phase, 10" blade diameter

Powermatic PM2000 with 52" fence and router lift. Excellent condition, hobby use, looking to get $1500.00. Located in Southeast, PA (Bucks County). I have equipment to load.487304487305487306

Cabinets will have face frames

I picked up 4 @ 5' x 5' x 18mm sheets of Baltic Birch plywood from a local supplier for a cabinet project in my dining room. I didn't notice that the plywood wasn't completely flat until I got it...

My FB600 is a really nice bandsaw, but I'm looking to get better performance/quality cuts. I read the thread on the ceramic guide upgrade from Keith Outten and I am considering upgrading to those...

I like the current issue- the Chinese stool looks to be a fascinating and puzzling project. My wife even picked up the magazine and has told me I need to make this stool. I'm sure I am not as...

Maybe there is some hope. I still have an outstanding order from October 2008. I too will post a follow-up if my order arrives.

Mike has committed fraud and should be held accountable for his actions. When a business accepts a deposit or payment in full for goods or services and does not deliver, it is nothing short of fraud.