Hi.
When I checked it just over a year ago with Clear Vue and Oneida I finnally decided to go with Oneida. There is one point to consider with the ClearVue that pushed me on Oneida side, the CSA...
Type: Posts; User: Guy Boulianne; Keyword(s):
Hi.
When I checked it just over a year ago with Clear Vue and Oneida I finnally decided to go with Oneida. There is one point to consider with the ClearVue that pushed me on Oneida side, the CSA...
Try this one:
http://www.leevalley.com/wood/page.aspx?c=1&p=51233&cat=1,46168,46176&ap=1
Hi Norman. Thanks for that tip....... that is THE one I beleive I have missed until now.... I don't know if there is enything else about it but on my saw, the aligment dont even come back after I...
Hi all.
I am more a regular lurker than poster.
Many of you (as some mags) talked about the Bosch 1591 recently and have just very good things to say about the 1591.
I have made a few...
Euh..... You should have seen the dust cloud elevating from the pile when a friend of mine came to mill some Mahogany last december.... It could depend on the wood spieces and/or the fact that a...
You're Rigth.
May i Cite Bill Pentz's text here:
=========================
My doctor, a fellow woodworker and pulmonary (lung) specialist helped and pushed me hard to learn what went wrong...
You know what ????
What I was about to do was turning the transition elbow (from the blower outlet to the filter) horizontally, and then, if I wanted to set the filter vertically later on, just...
Hi David.
As others said.... well I wont repaeat....
Do you intend to save these parts ???
Iy you can't downsize the frames for any reasons, is your design could incorporate the addition...
Hi Rob, from Oneida web site (as we are not in the USA, just drop them a email and ask, I requested a shipping quote prior to order the machine and they have been just fine with that) :
Welcome...
9102K186 - $10.29/each
9102K436 - $8.93/each
Material is available to ship today. Approximate shipping charges are $45.00. We deliver material, brokerage-free, to Canada in 1-2 business days...
I just wrote them to ask for a shipping quote (8 6" y and 11 45 deg. elbows), a quick reply informed me I should have some news in the next Hour !!!!
I live in Québec city so....... better check...
Hi Rob.
Down here in Québec city, I could not fond (yet...) the 2729 PVC grade that is mentionned as the cheapest, what I have found is the 3034 that is called BMQ here..... Below are the prices...
Thanks for the answers guys.
Jim, Are you sure it does happen t overfill the bin ??? I dont why you assume that :rolleyes:
To obain my best setup I would just have to turn the outlet...
Hi everyone.
Has anyone ever installed the cartridge filter horizontally ??? It would use overhead space close to the corner instead of tool's outfeed space or hanging in the "circulation" area....
.... maybeeven better, convert that horizontal surface in a sloped one so you wont put anything on or over !!!
Guy
For 2004 Christmas, I have made a bunch of cutting board, some maple/walnut and some cherry/walnut. Mine is walnut, I use it so I also maintain it (re-oil) and it is still a nice very dark brown. My...
When comparing two cyclones, I realized that the Clear Vue pulling 1800 CFM (estimated with a static calculator and a fan curve, with my ducting design in hand) "could" move ALL of the air in my shop...
Hi Jeff.
I have seen somewhere (probably a printed mag.... wich one ???) that you can also use a soft drink can, I dont know the exact thickness but as they are not what they used to be, it is...
Hi Jay.
In my personnal experience, it turns quite quickly from the freshcut brown to the nice purple (leaning toward the blue), a matter of a day or two..... If you use an oil finish.... it will...
Hi Andy.
I would just swith the jointer and planer. By adding a shelf at the infeed of the jointer and another one at the outfeed, that will be at the infeed of your planer, you will have a great...
Well, the table did not just needed to be lubed but also to be cleaned.....
So I cleaned the table and gave it 2 applications of Top Cote, the celaned the exposed part of the rollers (I did not...
You make me realise it may be some feet of wood have been fed trough it since I spayed TopCoat on the table, I will start with this, then clean the rollers, as I have quite a few suggestions and...
Hi Scott.
I am planning to build this one:
http://www.plansnow.com/mitersaw.html
This one give you about 22" + your saw's side support (10" on mine), that is 32". I will have it mounted,...
HI everyone.
I have a 22-560 Delta 12.5" planer. I bought it a couple years ago but dont do that much woodworking.
It recently started to "slip" on the wood. Do I need to change the rollers...
Hi Roy.
I am no expert.... in the process of settong up myself, just order that big monkey cousin yesterday (is it a gloat ???).....
For the theory, when you split a line in two, you try to...