i have had the same issue a couple times with my G0454z, both times it was the starting capacitor. (they went bad 4 years apart and over 5000bf of material)
Type: Posts; User: Mike Metz; Keyword(s):
i have had the same issue a couple times with my G0454z, both times it was the starting capacitor. (they went bad 4 years apart and over 5000bf of material)
Charlie,
I had the same problem Twice with my G0454z. Both times it was the start capacitor. When i called grizzly tech support to troubleshoot, they advised me that it is a very common problem on...
Yes its KD. While i don't have a use for all of it (as of now) i do have a kitchen build im going to start soon where im planing to use it for the drawers and pull outs. it just seemed to good to...
so i Went to my local lumber yard looking for about 20bf of hard maple for a mantel project. i left with 160bf of 4/4 Select grade 6' hard maple @ $2.00bf i had to buy it all to get it for that...
i have had the 651 for almost 4 years now, its has a lot of power and built very solid.
i have had the g0490x since it came out, its still running like day 1. i face joint and edge joint over 100bf a month on it and its always a perfect cut
try http://www.cshardware.com/lighting/led.asp not sure if its what you need exactly, but they have a nice selection
Jr,
im thinking that's it as well. where did you find that profile at? i have been searching all over the net
thanks
Thanks for all the input so far.
I have both a shaper and router table so any cutters will be fine.
These cabinet doors are from a new home that a client is wanting me to try and match the best we...
Ive been looking all around to try and find a matching profile for a rail and stile for a door. these are the only pictures i have. does anyone have any idea what this profile is called or where to...
Like Dave said i have used the engine hoist trick. Worked very well to remove my 20" grizzly planer off the pallet
i have the 80 tooth oshlun blade on my kapex, cuts great and smooth..
i have the grizzly version of this sander and had the same problem for awhile. Then i thought of shrinking the rubber on the spindle. how?? i put the spindle in the refrigerator (my small garage beer...
its not super bad i guess. i get about 12 - 20mpg for daily driving. i don't really load it up a lot, so i don't know what it would get under those conditions. I bought the truck back in 2002 and...
my 150/5 gets hot just as your does. i have used it for over 2 -3 hours and it never really gets any hotter than it does after the first 10 min.
The truck bed dropped down about 6 inches with it all loaded. the truck is a f250 super duty v10 crew cab long bed, so it has alot of front weight to keep it balanced. it was the smoothest ride home...
Gonna use it all to smoke meat in the BBQ all summer!!
j/k
a big hunk of it will be for all new kitchen cabinets for a client. the rest will be used for anything and everything that comes along....
Just picked up a little under 600bf of 4/4 White oak for just a bit over $600. Some boards are over 16" wide most are 8" - 13"
Good Score?
231284231285231286
I just had a similar issue with my g0454z planer. my issue turned out to be the start capacitor, mine was just out of warranty as well. they had the part in stock and within about 4 days i was back...
i have ad the 490x for about 5 years or so now, awesome tool! still on the original set of cutters (3rd side). smooth cuts flat and true, even on figured wood!
The finish is boiled linseed oil, then sprayed with 3 coats of polycrylic, sanding with 320 between coats. the case is constructed with soft maple dust frames using domino's and traditional mortise...
I just finished a Black Walnut dresser and chest for my girlfriend (little late Christmas gifts).
not the best lighting for the pictures
219218219219219220219221219222
Craig,
2012 catalog prices are
g0555p $495
i don't see a 10" belt sander, did u mean the drum sander? if so g0716 is $415
hope that helps you out!
Better order now!! i just got the 2012 catalog and it seems like alot of the prices are going up on the 1st!
With the "Golden Black Friday " Sale going on now, im gonna pull the trigger on a floor standing mortiser. But now im stuck between the Powermatic 719t & the Shop Fox W1743. I have alot of grizzly...