Jim,
Here's a couple of things you might want to take a look at. One is from the Jointech website - under the free downloads section (Vertical Miter Fixture)
...
Type: Posts; User: Kevin Smith; Keyword(s):
Jim,
Here's a couple of things you might want to take a look at. One is from the Jointech website - under the free downloads section (Vertical Miter Fixture)
...
Jules,
Here's my post from earlier in the week... http://www.sawmillcreek.org/showthread.php?t=57264
I purchased the Freud LU91M010 and am very pleased with the difference in the way my RAS...
Louis
My RAS is pretty much dedicated to cross-cut operations as well. I have however, made a couple of auxiliary tables for cutting miters and/or dados with this saw. So given that..., maybe...
Over the past few months, I've read a number of different post which spoke to the benefits of utilizing a blade with a negative hook angle for a SCMS and/or a RAS. So…, I decided to take advantage of...
Doug,
Your comments got me thinking about an article I had read in Wood magazine a couple of years ago. So... I went back though my stack and was able to locate it (issue #162). It too, was...
Grant - Thanks! I'm not familiar with the Magnate brand router bits but will take a look at them today.
Glen - Good point… I'm currently using a single speed router with my jig and would need to...
Since I have a narrow bed jointer, I often use my router to surface one side of the stock before running it through the thickness planer. Currently, I'm using a 3/4" diameter straight bit to perform...
Bruce,
I may be wrong but... it's my understanding that the "rebate" is applied at checkout. Maybe someone else can provide a more definitive response.
Jim (everyone)
If you're trying to figure out what to do for an insert, take a close look at what Dan posted earlier. I ended up reworking my table to take advantage of the "offset" circular...
Bruce,
It's my understanding that the item will have the "take 20% off" label if it qualifies for the discount. I was planning on purchasing a new 10" saw blade and discovered that the sale only...
Carroll
Based on your price point - it sounds like you purchased your PC router through Amazon. Have you received their $25 promotional certificate yet? I contacted their customer service last...
Keith - I checked the Woodcraft website earlier and wasn't able to find anything there. I'm guessing that some of their stores are just working off their inventory.
Jim - Thanks! Woodworker's...
Does anyone know what happend to these guys?
I purchased one of their 8' Pro Series clamps last year from Peachtree Woodworking along with the saw and router plates. Overall, I've been pleased...
I mailed my rebate in on 3/3/07 and the online status shows that the rebate "shipped" (not mailed) on 4/5/07. Not too bad on the turn-around. Hopefully, I'll see the check this week.
Thanks to everyone for their input.
I was having some difficulty understanding why this company needed to launch a second store-front - just to sell these lower end router bits.
Maybe it's...
Ben,
I purchased the Woodpecker PRL for my PC7518 just a couple of weeks ago and am very pleased with my decision. There are a number of Creekers out there with this combination.
However, if...
Does anyone know why these guys operate two separate stores?
In the past, I've purchased router supplies from Eagle America.
From what I can tell, pricing looks to be the same. Am I missing...
Glenn - It looks like this should work pretty well. Good luck finding the needed wall space for hanging...:)
Jerry,
Most of the better magazines have already been listed. However, don't forget about your local library. They may have a number of magazines and/or books to help you get started.
Since there has been a number of comments regarding the 45 degree miter fixtures, I thought I would share some additional information as to how I utilize these components…
From my experiences in...
Glenn,
Thanks for your respone to Art's question. I didn't see it before I made my post.
One of the other things that I didn't mention is that my t-tracks are located directly above my...
Art,
The base of the sled is only made out of 3/4" stock. Therefore I would suggest using 3/8" deep t-track - which is specifically designed for use in thinner stock. However, since the sled is...
Thanks to everyone for their feedback.
I'll try to answer some of the questions posted earlier…
Sorry, I didn't take time to draw up the plans before I started. I basically knew what I was...
I thought I would share a couple of images of my TS sled. This in no way compares in functionality or workmanship to that of Mark Marzluf's sled - but incorporates some other ideas and/or approaches...
Some other thoughts and/or questions...
What effect does the force of the blade have on the stock being cut? Given the rotational forces of the blade, is there a greater tendency for the stock...