Search:

I am making a saw track. I have the rails in place and am preparing a precision cut for the stiles on a RAS. I glued two pieces of wood together between the rails to serve as a substitute. I will set...

For flexibility I try to find 2 wire cords for 2 prong tools.

It is a nice spring day and I decided to repair the tool tray myself since it is a bit unwieldy. I forget that it's broken and it's a natural hand hold as it covers the top of the ladder. I used my...

First it is impossible to mount the ladder without grasping the tool tray as it envelopes the top of the ladder (IOW not really an add on accessory). Since it is also the hand hold for mounting it...

When my Coleman step ladder fell over and the tool tray broke I found that the Coleman name was being used by a licensee. A licensee that wouldn't stand behind the ladder and by its own words doesn't...

I considered using post-formed tops with some custom cuts, such as cutting off the backsplash so that I could scribe and fit to the wall then adding a tile backsplash. I also considered some special...

My son had one edged in oak (not even laminate over) that held up well (even in sink area). I chose not to use either hardwood or a contrasting edge as that would serve to emphasize that it was...

I don't have those long ugly miters in the corners. I built the substrate in place with glued butt joints and underlying cleats. The formica is butt jointed at inconspicuous places where possible,...

I went with BevelEdge ogee. Here's the final result:

I built my house with a 9" Craftsman RAS. I ripped #3 pine to size and used a molding head in the saw to cut all the millwork in the house. I later moved up to a Delta 33-267 that a friend sold me...

I used Formica 180FX in 3466 Antique Mascarello and it doesn't show in the Gem Lock stock list. However, Gem Lock looks like great product, any idea of cost per stick?

Terry, how is the stop block on the jig used? I just can't visualize it in an actual cut.

I am in the process of rebuilding my kitchen counter tops. I read a book by Herrick Kimball "Making Plastic-Laminate Countertops" before tackling the job. I opted to build in place with 3/4" MDF. The...

A cousin with a cabinet shop in his hardware store was sweeping sawdust into small boxes. I asked the obvious and he said if you place the box in the fire and don't poke it, it will hold together...

Thanks much, I just took a look under the track with a mirror and spotted the three socket head cap screws so it's now on my to do list.

I have a Rockwell/Delta 33-267 turret RAS that doesn't exactly track for a 90 degree crosscut. I don't readily see any adjustment to zero the turret and don't have an instruction manual. Does anyone...

How is the stop block used?