Al
Can you advise what programs will convert a photo to a sketch, sounds interesting
Thanks,
Pete
Type: Posts; User: Peter Meacham; Keyword(s):
Al
Can you advise what programs will convert a photo to a sketch, sounds interesting
Thanks,
Pete
Does anyone have, or know of a source for, a vector drawing of the famous MM grate scene from the "Seven Year Itch" movie please?
FYI, I think the password on my old Trotec is "name" (without the quotes, all lower case)
I recently purchased, from another person, a used Epilog EXT engraver that was still under factory warranty.
I thought it would be prudent to advise Epilog of the transfer of ownership so I could...
What would be a good material to make personalized license plate frames? Probably a Rowmark product, but which one. Something silver with black subcoat for the letters.
Sure Dave, lay off that corn out there in Iowa!!!
Dave
I looked on Aspire, which I think should be the same as VCP. Look in the "Create Vectors" section of the Drawing tab. In Aspire, the last icon (with a question mark) is for doing the...
Thanks for all your inputs. As it happens, I also posted on the Vectric forum and Paul Rowntree was kind enough to draw the file for me and I tested it today. I just need to adjust the amount of...
Can anyone assist me in Aspire to design a 1.25" diameter hole that is slanted 10 degrees from vertical.
The bottom of the hole needs to be .3750" (3/8") deep at the highest level and will slant...
Alexa
Any idea where one would get a 6515 controller?
Pete
This post may belong on another forum as it is not exactly engraving, per se., but, here goes:
Looking for a source that will print or sublimate color logos on ceramic serving platters (roughly...
Thanks for the replies.
Checking the Grayscale Off button did the trick.
I can selectivity raster (or vector cut/engrave) with the full Trotec pallet of colors, I think there are 10 or more...
Thanks for the reply Mark - That is a solution, but there must be able to have all colors that will be engraved turned on at the same time and the machine should only do one color at a time. When it...
Anyone doing color mapping on an old Trotec Speedy 1.
That is, to use the different colors to engrave objects in order (Black- Engrave object 1 first, Blue - engrave object 2 next, Green -...
I don't blame you Brian, that Laser Cut software is pure junk.
Mike
Thanks for your help. The convert to curves function on My X5 is grayed out when I select the bar code. And the keyboard shortcut does not work either.
Pete
Thanks all for your inputs. I will try the old bar code in the white box trick. I have ordered a bar code scanner as well
Well, the problem is that a bar code in Corel is very protected.
You...
Glen, well that worked - what is it going to look like engraved on to a black anodized tablet case. I need to have black bars on a white background.
Well, the sample anodized tag with the bar code did not scan at the school.
They probably have older scanners that do not scan negative (white lines) bar code.
And, Corel does not allow...
Thanks for the inputs. I took the photo at the school and then left, not realizing it was out of focus.
In any case, I recreated the 27013 tag in Corel and you are both correct, it appears to be...
Scott & Tony, thanks for your input. I don't know one bar code from another and Corel has a ton of them to choose from. So, I am hoping someone can chime in and advise what type of code I need.
Does anyone recognize the attached bar code and can advise me what I will need to engrave them on tablets. Sorry it is out of focus.
Walter
I click on the left most icon on the tool bar when you are composing a reply or post. The icon has two letter A's on it. That icon changes the edit mode.
Pete
Greats inputs everyone, thanks.
I will try some of them and report back.
Thanks again.
Another thread on this forum piqued my curiosity about the possibility of engraving an arched surface, in this case a wine barrel stave, by an auto focusing Z axis or another method.
A typical...