Chicago Latrobe and Drill Hog make up most of my metal and wood shop drills.
Type: Posts; User: Alex Shanku; Keyword(s):
Chicago Latrobe and Drill Hog make up most of my metal and wood shop drills.
I use this adapter to connect the sander to my 1.5 cyclone hose.
BOSCH VAC002 Vacuum Hose Adapter for 1-1/4 In. and 1-1/2 In. Hoses , Black
https://a.co/d/6E8zjjJ
In the early 2000s I had a cordless Craftsman drill that had a bubble level in the back of the body of the drill. You could view it from atop the drill or in the axis of drilling. I'm not sure how...
The one I had looked into last year, for wood, was the nano line of finishes. The boat detailers have been using the cermaic products for years, and if I remember correctly, I was hearing siloxane...
Some of these new ceramic coatings are siloxane-based. Calling them "ceramic" somewhat makes sense, in as much as they are not metallic or organic compounds.
Blue painters tape on both parts, CA glue, and accelerator is all I use. Unlike double sided, this method has no creep and is way stronger. I turn 12"+ blanks attached to a 4" face plate with this...
Good info, thanks. I'll add him to the woodworking queue.
There's a few good threads on this forum discussing this exactly. I beleive that using transtint was brought up in this one, at least:
...
Good video, thanks for sharing that. Quite the Festool collection he has....
I'll second this. I've been using Osmo (both the matte and, more often, the Thin) on almost all my projects and turnings this past year or so. My computer wrist support (made out of cherry and...
I wouldn't ever put epoxy on a cutting board. Unlike the end grain, the epoxy wouldn't close back up and every knife mark would accumulate. Durability issues aside, I would also be concerned about...
With a ruler that's 1/16" thick, it's about 1* of bevel and about 1/8" long. Surely there must be many worse suggestions out there :D
Also, I've never heard anybody refer to the flat surface of a...
Doucette and Wolfe do incredible work and are worth watching. The side and arm chairs video was especially good, imo.
https://www.doucetteandwolfefurniture.com/Home_Page.html
...
Your top illustration makes sense to me. FWIW, before I knew about router sleds, I flattened my solid top, maple edge grain bench with my #7. I worked alternating diagonal until it was flat, then...
I use the pallman brand cleaner and a generic microfiber mop just like you would with any flooring cleaner, maybe once a week or every few weeks if the kids haven't tracked mud through the room. I...
I used Pallmans Magic Oil on about 1000sqft of white oak. I love the look and feel. Has held up just fine for 6 years, now.
https://us.pallmann.net/detail/product/7208/magic-oil-2k
Beautiful. Any pics of the carving process / workholding?
I've been using the Amana 8" Electro-Blu set for the past year or so and really like it. Incredible cut, no tear out, nice flat bottoms, easy to shim.
...
Here's a good article about finishing with Osmo Polyx. I've been using Osmo for more and more projects, and generally follow the advice in this article to use the Osmo extra thin as a first coat,...
Looks great, Mark. Well done. I like the figure in the wood and the hinges are cool. Where did you get them?
Not to say that there arent a myriad of ways to do it, but I used a pencil, tape measure and a 1/2" drill with an old beat up 3/4" spade bit. Drilled my holes and it works just fine...took all of 5...
Send them to Jamisons....Razor sharp, much much sharper than "new blades"
I would find a 3/4hp delta motor, period correct, with a 1/2" shaft.
I would not try and enlarge the bore on that cast step pulley.
But thats just me.......
sawdust getting trapped underneath?
I have a top slightly thicker than 4" and my holdfasts work just fine without any additional tinkering.