Search:

Dont have a cell but got this used lap top recent. Thought if im out I can check emails and sure enough someone I was going to meet Sat was late and the place we were meeting at was gone. If I had I...

years back I used to cut the lawn at times for an elderly neighbour or his son in law other times. From cutting the lawn saw two Clematis left for dead. When the home was sold asked a daughter if...

The old guys wife passed recently and now all four of that family are gone. Two sons included in that statement and I drove home a bit numb realizing they are all gone. I had mentioned the tomb...

I like the politician who was pulled over by a cop at Queens Park. Said to the cop do you know I am? Cop said no but its on your drivers license.

People have asked me enough over the years and...

I heavy rust proof then leave it till spring. The manual says power wash below after each winter. Im not set up to that and once did hire they didnt care much about doing it well but can go to one...

Last wadkin I saw sell was 800.00 plus had 8 chisels with it. The wadkin was likely 40 years old and irrelevant that it was.

Tom so what type of tires are on my 1962 Wadkin DR? Still in the graveyard, pretty sure its original tires.

End grain or side grain i double coat and dont thin. washcoat is a different beast for a different reason.

always change my own oil. Bought a wallywagon in SC. Way home got an oil change in Ohio as it was overdue. got home oil on the driveway next day, checked and the dumb ass kid had cross threaded...

set up the rear wheel should not be turning, when cutting and putting pressure on it it should be turning.

Always saw bandsaws mostly italian at auctions for 750.00 to maybe 1,200.00. they were working in production at the time and most needed nothing. All were three phase.

some buy the land to park money and the land goes up and its sold seen this in TO past,. They want it to make money but more so they want the land that most often goes up. Ive learned detail from...

you said the wood was cold. If you bring in cold wood you can get failure till its warmed to some level, you dont say how cold. Also age of glue.

Too bad a school is teaching that.

its a pretty wild video of that whole number of them carrying the piano side layers and into the jig.

Reminds me of past people when they capture a giant anaconda and you see 8 or 10 guys spaced...

the toro I have also sucks up leaves and mulches maybe 12:1 into a bag hanging over the shoulder. Is this on any battery ones or only blow.

I dont use it often but have past and it worked...

then they would be musical chairs.

I guess because I watched the Steinway you tube on the bending wood thread the gods of electrons stuck another you tube on the side bar next time i was on you tube. I fell for the bait and this is...

Where do you get lifting straps? I use chains on the machines and they are great as you can lock on any place and adjust lengths and more. Only negative is the weight of a number of 3/8" chains. ...

still on cord and at times its annoying. Think I read a review of a Milwuakee blower and some unhappy users but will check it again. I learned to detail cars in LA and we used leaf blowers to dry...

Dont know the sander but can you not use large angle iron. Im pretty sure on my progress machine 6" wide belt the fence is a huge chunk of angle iron

for 400.00 to 1,000.00 you can buy a used cabinet saw. You can add a few jigs made from scrap and probably have a better saw than most shown here. You are limited by these smaller saws where the...

putting ply down works great, its no different than a zero clearance insert and maybe better.

drop a sheet of quarter inch ply with a stop block front and back on the table saw. Turn your blade up through it and thin rips are fine.

think its called an Orbit what they do for your eyes. have been in the tube a few times