Rick,
It sounds like you made your choice. In the future, consider a multi-heat gun. You can use a low-heat setting for temporary and high heat for permanent connections.
Regards,
Dan
Type: Posts; User: Dan Clark; Keyword(s):
Rick,
It sounds like you made your choice. In the future, consider a multi-heat gun. You can use a low-heat setting for temporary and high heat for permanent connections.
Regards,
Dan
David,
One thing that no one has mentioned - what will you be using it for? If breaking down sheet goods, the TS75 may not be the best option. A TS55 is typically considered to the better...
Martin,
You're not the only one who doesn't care about the Ceros power supply. My Ceros 150/5's light weight weight and handling outweigh any minor issue with the power supply.
That said, the...
Larry,
Yes, Festool routers and saws use the same Festool track. And their jig saws. And they have several clamps that work with the guide rails.
Micro Fence makes interfaces that...
I have the 1/2" system hooked to a California Air Tools (http://www.amazon.com/dp/B00889ZYOW/ref=sr_ph?ie=UTF8&qid=1424633913&sr=1&keywords=california+compressor). It's fairly easy to install except...
David,
Camera makers make cameras. Almost all are poor software developers. Yes, they make some software for their cameras, but it is typically very poor.
While some of the options...
I've been pondering a veneer press press kit for a couple of years. www.joewoodworker.com is definitely my first choice. They are an excellent source for kits, components, and veneer. This is...
The 14-12 does have these adjustable lower wheels. I've had to adjust mine based on direction from Laguna support. Note that issue occurred BEFORE the lower wheel was adjusted.
I found that...
Your bench has one major difference from the OPs bench - there is a brace between the front and back legs about a few inches above the bottom horizontal board. This should help eliminate front to...
James,
Thanks for posting this. I'm the OP of that other thread and am very interested in the topic.
One of the challenges with measuring coplaner in the 14-12 is that the wheels are set...
It turns out that I'm creating racks for my chisels right now and am wrestling with the same issues. Cutting slots with bandsaw is a very interesting idea. For the chamfers, you might consider...
I agree about the flat board. From what I can see, it looks like there is limited support for front to rear racking forces. As a test, the OP might want to consider vertically lag-screwing an 8/4 X...
Phil,
Thanks for the feedback. Apparently, that's a characteristic of this saw. Given that it's now working fine except for this issue, I can live with it.
Regards,
Dan.
Overall, this issue is resolved. At first, I adjusted lower wheel so that the 3/4" blade was centered on both wheels. That worked fine, but then the 1/2" and smaller blades were misaligned in the...
Another option is this guy: http://www.amazon.com/Bolt-Thread-Checker-Inch-Metric/dp/B003FJW0GK/ref=sr_1_2?ie=UTF8&qid=1423080427&sr=8-2&keywords=screw+gauge . Unlike many of of the others, this...
Of the folks who think it's a gimmick, how many have a Festool MFT? (I do.)
When using the MFT as a table saw with the drop down guide rail, the rail is typically aligned to cut the wood at 90...
Mike,
Was Laguna Support able to resolve your 14-12 issues?
Thanks,
Dan.
Jack,
Welcome to the forum and to woodworking. That said...
I just threw a curve at you: What is "woodworking"? :) Ask 50 people and you may get 50 different answers. Then ask what tools...
Stew,
I'm a big fan of LEDs, but that seems like expensive overkill. If you're shop is of any size, you'll need multiple light fixtures to provide adequate light.
One of these fixtures...
Mike,
If you keep having issues, Brian told me to pass along his direct phone number and email:
800-332-4094, ext. 6155
brian_diaz@lagunatools.com
Good luck,
Dan.
This is the second Randy Woodworking video:
https://www.youtube.com/watch?v=1KRo_lVzH90
Mike,
Your saw may have an issue similar to my 14-12, but more severe. The lower wheel can be adjusted with the upper and lower adjusting nuts on the motor side of saw and close to the motor. ...
After an odd set of circumstances, I ended up with four blades for my Festool Kapex - a Tenryu MiterPro plus 80T, a Forrest ChopMaster 80T, and two Festool blades. So I did a review comparing them:...
Oooooh... Really feeelthy tool porn!!! Primo stuff! :D
And wait until you handle some other excellent stuff from companies like Lie Nielsen and Veritas (excellent hand tools), Sawstop, Festool,...
Last Sunday, I stopped by Rockler Seattle and tested my blades on the floor model. The blades acted the same way on both saws. This kind of implies that it's the blades. OTOH, I have difficulty...