Search:

Yea, I luckily have some scrap 3/4" baltic birch and some wilsonart laminate lying around. I suppose its time to bite the bullet and make some face plates for it. I am just surprised that a top tier...

Luckily the metal fence itself is perfectly straight.. I guess I just need to make some new faces for it.

I did call Powermatic and they seemed to have never heard of the problem.. I bought the saw "scratch & dent" so it unfortunately does not come with any kind of warranty.

I've had this problem for the year and a half that I've had my PM-1000 saw and am interested in seeing if others experience it as well, and if so, how you deal with it... Seeing as powermatic uses...

That really helps, thanks a lot for the pic and explanation. Would you mind providing me with two measurements?? I am hoping to know the actual diameter of the cyclone body at its widest part (rough...

Yea, I am hoping to have the motor stick up between the door track and the wall. I measured that space and it's about 19". Do you think that will fit between there? The track itself is 87" from the...

I am thinking of installing a V-2000 in my one car garage shop, and am hoping to get some help with needed measurements to be sure it will fit where I want it. The garage itself is 11' x 17' with one...

I am definitely not decided on the Oneida, but think that it might be the best fit.

I'm looking at the portable over the V-series because I will end up wall mounting it and connecting it to ~20'...

Hey Craig, have you gotten the portable dust gorilla up and running yet? What do you think?

I am finishing up my shop electrical (rough in inspection tomorrow), and nearing the need to pull the...

I did a ton of looking for my only set of cordless tools and I decided on the Hilti 12V line. Drill, impact driver, screw driver all came in the kit and they are amazing. I realized that for my...

That would be great, I am definitely interested in getting your take on the quality, performance, and value of the unit.

If anyone else has any feedback or recommendations, I would definitely enjoy hearing them.

Hoang, how has your experience been with the portable dust gorilla? I coincidentally just posted asking about experiences hooking the same one up to a ducted system. See my recent post in this forum....

I am looking to set up a dust collection system in my small shop (11' x 17') and trying to find the smallest and most efficient cyclone DC system. I will be installing it in a permanent location,...

Thanks Lee.. Anyone else experienced this? Seems that with as many PM saws out there, I cant be the only one.

Just wanted to post an update now that my project is all done...

I went ahead and used the #38, waiting a few days between coats. I found that it just took a lot longer than normal to fully cure...

As its gotten colder here over fall and winter, I have noticed the nylon side plates of my PM-1000 table saw fence to be much more warped than normal. I know that with this style fence, its pretty...

Finally got to start sanding down the first coat of finish that had finally dried.. It sanded really nicely, producing a smooth surface and fine white powder.. So, I am thinking that instead of...

So what would be the best thing to do from here? Can I paint over this coat with Arm-R-Seal, or do i need to fully sand off this old finish?

So I just checked the table top after its had a chance to dry for a few days.. It looks like its now dried to the touch, and likely would sand properly. I havent had a chance to fully check into it...

I just did basically this same thing to my cabinet saw after a few projects of baltic birch.. I first went after it and got everything I can out of it with my shop vac. Then, as part of a whole shop...

I am actually finishing in one of the spare bedrooms in my house to avoid that issue.. its probably 65-70 degrees in there and its been pretty dry out..

I am kind of freaking out right now.. I just put the first coat of Pratt & Lambert 38 on a table top last night and came back today (13 hrs later) and parts of it are still tacky. I believe this...

Sorry, I should have clarified a bit more. My understanding is that the saw is brand new from the retailer, comes with all normal accessories including fence and everything. Just has some dents.
...

I am finally picking up my first table saw.. Something I will be using to do a kitchen remodel (including cabinets) and plenty of furniture making. I believe I have the opportunity to pick up a...