Steve - as I understand it, you need to be careful with switching back and forth. I think that everytime you switch, you will be considered a new subscriber with that company. That means that any...
Type: Posts; User: Mike Williams; Keyword(s):
Steve - as I understand it, you need to be careful with switching back and forth. I think that everytime you switch, you will be considered a new subscriber with that company. That means that any...
Do they need a tetanus shot / booster before they show up?
My guess is that this is being filmed in the saw manurfacturer's shop, not in a production environment. Perhaps it's part of a final inspection / acceptance test. In my job, I often had to test and...
Jason - I bought the 4' T8 lamps for my 34' x 40' shop on-line from www.bulbs.com. They were delivered quickly and with no damage.
I ordered high CRI bulbs (98+) for my workbench and finishing...
I know. The power transmission guy and I looked at the motor shaft and measured it in a number of places. It was still round! He couldn't explain the 29/32" bore on the sheave. He said that was...
Randy,
I have a PM66 that I purchased new in 2000. After four years of light use, I stored it at my brother-in-law's for four years (2004-2007) while we were overseas. I know it sat for three...
Jim - I recently placed an order and received a Grizzly 12" jointer (G0609X - 1,059 lbs.) I called Grizzly customer service to place the order, rather than use the website, so I could ensure I...
I don't have the knowledge to answer my question. Is anyone concerned about the Grizzly 2 HP cyclone dust collector being undersized for some of the equipment listed (e.g. a 20" planer)? I know it...
Jim - like you, I wanted the same degree of fire spread control in my shop (separate 34 x 40 building) as I had in my house. But I also wanted the convenience of being able to hang things on the...
Steve - I haven't noticed any noise, but to be honest, I don't yet have a lot of time on the system. The heating system didn't start up until last December, and I didn't finally get my occupancy...
Andy - I just finished my new 34 x 40 shop using radiant heat installed in the joist space under the floor.
I have 1 1/2" of floor (3/4" Advantex and 3/4" plywood). The Pex tubing is installed...
Jim - get the SketchUp view the way you want it, and then do a File - Export - 2D Graphic. It should come up with a .jpg file extension. You can then save it as a JPEG picture, and then size the...
Barry - I can't tell you the answer in perfect SketchUp terminology, but I can put you on the right track.
The 'smoothness' of your elbow, and how close the two ends are to being 90 degrees...
Andrew - I do not have task lighting, and right now don't believe I will need any except for possibly some very detailed hand work. I also have the lights set up on four separate switches, so I can...
Harry - I am no expert on fluorescent lighting, but I believe your source might have been referring to picking a light bulb with a high Color Rendering Index (CRI).
"What is Color Rendering...
Andrew - I used the FWW article Ken mentioned above to design the lighting in my new shop. The main work area is 20' x 40' with 10' ceiling height. I am 57 years old, and definitely need better...
Bob - a quick search on the Garmin site (http://www8.garmin.com/cartography/ontheRoad/) showed maps for North America, Europe, Middle East, Brazil, Singapore / Malaysia, Thailand, Australia, Mexico,...
Adam - all of the above posts have focused on slimming down the legs, which I totally agree with.
Personally, I think this kind of table should be light and airy. I think the front and side...
Matt - any chance you can agree on a price to do one table to start with?
That would give you a feeling for how long each will take, with some improvement in technique and efficiency?
It...
Sean - my new 1400 sf shop is getting the Mitsubishi Mr. Slim mini-split system. I'm actually getting a 3 zone (30,000 btu) system, and although I'm only going to use it for AC, it actually is a...
From a safety standpoint, be careful if the original lamp had a socket with a low maximum wattage bulb (say 60 watts) and a close-fitting lampshade.
Installing a 3-way bulb (50 / 100 / 150 watts)...
Rob - thanks for the follow-up questions. As it is still just a large open room, I have a lot of flexibility at this time. I'm probably a month away from taking the space over from the contractor -...
Rob - I plan on storing lumber just inside the 6' x 8' entry door, and right across from the miter saw. I could also put more lumber storage over the saw if required.
I decided to go with...
Justin - both the original zipped file, and the later pdf file opened ok for me.
My under-construction (but almost completed) shop is 34' x 40' - I hope it is going to be the right size!