Search:

Has any one ever put Antique Oil over Danish Oil. Would there be any thing wrong with doing this? How many coats of Antique Oil would you add? Trying to get a better shine. Thanks

If you want a visitor & some one to hall some off send me a pm. I will be in Blairsville,GA. for about 4 weeks I hope, about 1 1/2 hr away, I think.

I vote for the Delta.

Sorry to hear your bad news. Went through same with Ivan. Only salt water. Didn't have any wood left, only bad tools.

Well I found MAO at a Ace about 40 min. from me. Got some this am. Will try it this afternoon or tomorrow.
Kyle, I have been retarted for 9 years. So I have a lot of time for turning, when it is...

I use CA also, after learning on pens, I started using it on bottle stippers.

I have been trying to find Minwax Antique Oil local and can't find it. Where do you get your MAO? THANKS

202451202450202449I have turned a maple bowl that has some bark left on the sides. It is sanded to 400 grit. The bark is in two pitted areas on the bottom sides. What is the best finish to use on...

I bought the jet 1014 1st, then a couple years later bought a delta 46-460. I use the delta for more then the jet now. If I was buying today I would go with the delta. Like it a lot.

I am wanting to buy a new plainer. I am looking at DeWalt dw734 & dw735. Is the 735 worth the extra $$$? I hope to buy a drum sander later. Also where is a good place to buy from? I am retired and a...

I had already used the formula and figured about 1 gal. vol. for a 200 lb person. Does that sound about right? But don't want the side to thin, if it gets droped.

I am working on a segmented burial urn, using cherry scrap wood from a cabinet shop.
A few questions?
How thick does the sides need to be?
Is there any wood that is better than others to turn a...

I have the SuperNova 2 & a G-3. I like the G-3 on my delta a lot better. And it is cheaper.

IF you have a old bandsaw blade, break a piece off, make a big v, set bowl on teeth side.

I was wondering where you find or get birds for miniature bird houses? Thanks :rolleyes:

Next winter we will ask how cold it is where you are at? 100+ for several days in HOT sunny Florida.

I have both the Jet & Delta. I use the Delta by for the most now, and love it. Have had very good luck with the Delta. About the only thing I use the Jet for now is pens.

I ordered 5 round ones from carbide depot & 3 screws. The cutters are cuped (that what i call them). I got the 12mm ones. The screws are 3.5mm. Havent got a tap yet. I used a 4mm tork screw. ...

The baffel is installed underneath so you can't get in to tighting the turn buckles from the bottom. Don't think I could take the baffel out & get it back on with the filter in place. Looking for a...

I have a Shop Fox DC (2 hp). Added a Pnil Thien's baffle to the DC. Now I want to add Wynn filter to the DC. What is the best way to attach filter to DC?