Thanks, any suggestions on where to get a sheave and bushing of this size?
Type: Posts; User: Russell Smallwood; Keyword(s):
Thanks, any suggestions on where to get a sheave and bushing of this size?
This is a great idea. Will try. Thank you.
Thanks Jim! Good to know I'm not the only one. Impact wrench is an interesting idea. Will give that a try. You're absolutely correct that it's very difficult to tighten that bolt due to the fact...
This. I sent my last 6 to my niece who is a nurse in Chicago.
For the sake of clarity, here is the parts drawing. You see parts 98 and 97. They are missing from the drawing for the bottom pulley, but they are there. The bolt (part 98) is the bolt that keeps...
So let me ask a dumb question. Again, this is not my area of expertise so be gentle.
I was assuming the purpose of the key was to keep the pulley (or sheave?) from "slipping" when the motor shaft...
I will have to unpack this question a bit and get back to you. Lots of words here I don't quite understand.
Edit - Okay, now I see what you're saying. That might be a solution.
Yes, there is a key. This particular pulley does not have hex screws to tighten the pulley to the key.
How would pulley slippage cause the bolt to come loose? Honest question, this is not my...
That's a huge decision that can easily become a regret depending on the work you're doing and your skill level, etc. If it were me, I would buy the jobsite saw and use it for a couple of projects...
You will be really good at mortises and tenons when you're done!
Saw this the other day and thought it would be a great option for mortises:
...
Depends on what you're building. Some projects (e.g. outdoor furniture or simple gun cabinets) can have pretty loose tolerances and will go together just fine with some clamps and screws. Other...
All,
I have posted in the past about a problem I've had with my G0453PX (15" planer w/ spiral head) over the 10 years that I've owned it. I've contacted Grizzly a couple of times but we haven't...
Another CAT compressor owner here. Have had a 1 gal model for over a year and it is still going strong. Really love the lack of noise. Have been very pleased to date.
This is an area in which I have some experience. Traditionally, in the south, T&G porch floors were made with Cypress according to my research. Unfortunately, the cypress available today is nothing...
I doubt many of the projects on display in the back of fine woodworking come straight off the planer, but I'm sure there are a lot Adirondack chairs that do.
No Lowell, afraid not. No one in the family tree with that name.
Edit: At least that I'm aware of :)
Hey Larry,
I've worked a lot with Cypress and find it somewhat hit or miss. Modern Cypress is usually pretty young and has the same tendencies as fast grown white pine but a bit more brittle. I...
If it were me I would hand plane until it sits flat then run through the planer, flat side down. Re-assess and repeat.
Hard to add much to this post. Setup is key and you can get great results from stationary equipment if you set it up properly. I finally gave up on lunch box planers when mine slipped my clamps and...
This thread is a little stale, but I thought I'd add my .02
For me, making furniture, here are my requirements in order of importance:
1.)Flat/straight beds
2.)Table LENGTH
3.)Helical cutter...
Have an ancient super grind (?). Use it instead of my grinder to shape and put a new hollow grind on chisels and plane irons before taking a few quick freehand swipes on the water stones. Then I...
Had the same problem with my 15" planer. Key came out, Grizzly sent me a new motor, pulley etc. Then the bottom pulley bold kept loosening which would cause the belt to rattle. I had to tighten...
I would suggest a different route. Those nice square 6x6 oak timbers will twist, check, warp and bow over time unless they are old growth recovered timbers. Even with paint. If they are red oak...
Hand cut for me because
First you get to use your marking tools and admire how well they work and how easy it is, or you get to take a detour down the road
of researching the ways to measure and...
12" Hitach 12RSH on a rigid SUV which collects finishing supplies and dust. Wish I Had somewhere to store it until I needed it for the odd trim job etc.
That said, you'll have to go through me...