John is this what you are looking for??
www.solidsurfacesny.com
I had a large bath done, and you have to search for the seam. Installer was Josh - he did a sensational job.
Type: Posts; User: Jim DeMarco; Keyword(s):
John is this what you are looking for??
www.solidsurfacesny.com
I had a large bath done, and you have to search for the seam. Installer was Josh - he did a sensational job.
Well said Jim, this is the big missconception many manufacture try to seel HP to the consumer. If you read my prior post on this topic, the ONLY thing that matters in a properly sized DC system is...
I have an old Rockwell Radial drill. It is a great tool, and no trouble at all. Adds some great flexability!! For example drilling a hole in the end of a post, swing it off the side, and drill...
Let me attempt to make this easy. First I am assuming a home shop, or low production shop. Design your duct work first! A single machine is the easiest design (only one machine operating at a...
Two opposing corners should do the trick, as long as the lengths on the two opposite sides are identical.
Michael,
Welcome. You have NOTHING to worry about, the trip to PA is a nice drive, and well worth it. The only real concern you or your wife should have is leaving with ONLY the jointer. They...
Howard,
I have a 14 yr old Delta/Rockwell, a Skill super mag worm drive, and a one year old Porter Cable. All are great units, but you know what... more often than not you find me with the PC in...
Rob, I am making an assumtion you are in farm country. If so to combat maoisture making the gravity wagon a solid wet lump of 'dust'. Why not put the DC unit on top of a small gravity grain bin? ...
Everette,
Check out the cyclones Oneida has to offer, they have very good fan performance curves (since static pressure is what you need). As an added bonus, if you buy one of their systems,...
We DO have a choice
I have to add this, there is already a North American Produced Machine avalible to all of us. General (not General International) produces machines made in Canada.
How many of you out there...
Tod,
First and foremost, I love the idea, and I agree. However, you need to look at the big picture. If one were to do this, the quality has to be there, you must provide a benefit over the...
Specific gravity, multiply by 32.2 to get density in lb/ft^3
Hard Maples:
<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
Sugar 0.56
Black 0.52
...
Lets see what Dev can spot here????
http://www.sawmillcreek.org/showthread.php?t=29702
What an eye you have Dev. It is indeed, it is in great shape, and I believe it is a 36".... Oh by the way Dev, NO !
I bought the woodmaster, but the same concept. I actually just got a job out of it in which I will be duplicating the original trim in an 1850's home. I am not sure about custom cutters for the...
I did build Norms router table, and I love it!! Of course Norm has re-designed... so now I have to build another one ;)
29927 29928
(my $50 garage sale bench... original bench form a Rochester piano shop)
29929
Here are a few more pictures, I will stick another shot of the new Grizzly jointer in here as well....
29922 29923
29924 29925
29926
Please forgive me... I did not realize there was a rule for having to have the photos before I was allowed to share !! :D
So as a bonus... I have a few...
Dick,
Not too sure this will help, but...
I do have a fixture I made to do my own, BUT I use a surface grinder to sharpen them. Since most folks do not have a surface grinder....
I recall the...
Steven,
Do not quote me but I believe as long as the flue is higher than the peak you should be ok.
NEW 12" Grizzly Joiner
Well I got the machine up and running today, and I think my misfortune turned out to be a blessing in disguise. Quite pleased with the machine, took some figuring as to where I was going to put it,...
Thank you
Shiraz,
I can not thank you enough for both looking into, and taking care of this for me. I was a little upset still when I wrote the initial post, had a three hour drive to stew. You have...
http://www.sawmillcreek.org/showthread.php?t=29316
Well I pretty much decided the new Grizzly 10" with a spiral head. So I made the 3 hour drive to Muncey PA today... guess what!!
NOT AVALIBLE UNTIL JUNE!!
Tried to swallow my dissapointment, and...
Dan, the griz is looking favorable. Largest factor being service, I can be at Grizzly's front door in a touch over 3.5 hours. I would be willing to bet a good chunck of change that the Oliver (the...