Results 1 to 12 of 12

Thread: ambrosia maple hall table

  1. #1
    Join Date
    Mar 2003
    Location
    Oliver Springs, TN
    Posts
    236

    ambrosia maple hall table

    I've built a few hall tables for family and friends but never one for my wife. Well I decided that it was time to build her one. I've been wanting to build something using ambrosia maple for a while. This past summer while at a local flea market there happened to be a guy selling some great looking maple. He also had enough curly maple for the legs. The edges are purple heart. I gave this to her for Christmas. The only thing I wish I would have done differently is the legs. They are 2x2 and taper down to 1x1. They look a little thick.

    The ambrosia and curly maple were a lot different in color, so I used transtint honey amber color to "pop" the curl and tone the woods to better match. I then hand rubbed several coats of general finish seal a cell.
    Attached Images Attached Images

  2. #2
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,914
    Very nice and unique table, John. The "boss" is lucky to finally get one of her own!
    --

    The most expensive tool is the one you buy "cheaply" and often...

  3. #3
    Join Date
    Feb 2008
    Location
    Stanwood, WA
    Posts
    3,059
    Maple and PH go so good together. Nice work
    Dewey

    "Everything is better with Inlay or Marquetry!"


  4. #4
    Join Date
    Dec 2006
    Location
    Atlanta , Ga.
    Posts
    3,970
    Beutiful grain effect, John.. Been there on deciding on proportions as I think heavy even though not always the best route to the finish line. One of the hardest things for me to overcome.

    Sarge..

  5. #5
    Join Date
    Nov 2005
    Location
    La Salle, IL.
    Posts
    144
    Beautiful work with some great looking wood.
    I think the legs look good as is, but I'm not the person it was built for.
    Releasing sawdust from wood = releasing stress from the body

  6. #6
    Very nice, great blend of woods. I do not think the legs look too thick. They look like the are in balance with the top.

  7. #7
    Beautiful work, I really like that maple.

  8. #8
    John, were the legs straight grained, I would agree that they would be a tad bit heavy. But, with the dominant grain pattern of the curly maple against the ambrosia, I really think they need the weight to compete. It all blends very well. I would say you have accomplished a difficult task of marrying together two very distinct woods into a striking piece of furniture.

  9. #9
    Join Date
    Mar 2003
    Location
    Oliver Springs, TN
    Posts
    236
    Thanks for all the replies. The wife really liked it. Judging from her reactions from some of the things I have made in the past that have been really awful, she always acts like it's the greatest thing since sliced bread however. I think if I wrapped up a big pile of dog poo and told her I made it she would "act" impressed. She's a keeper!

  10. #10
    Join Date
    Feb 2008
    Location
    Flowery Branch, GA
    Posts
    729
    Blog Entries
    1
    John,

    Beautiful table. You brought the two woods together very nicely. Ambrosia is something you don't see a lot of.

    Great work!

  11. #11
    Join Date
    Feb 2003
    Location
    In the foothills of the NM Sandia Mountains
    Posts
    16,647
    I love that combination of woods.
    Very nice
    Please help support the Creek.


    "It's paradoxical that the idea of living a long life appeals to everyone, but the idea of getting old doesn't appeal to anyone."
    Andy Rooney



  12. #12
    Join Date
    Apr 2005
    Location
    West of Boston East of worcester north of RI South of nashua
    Posts
    87

    beautiful - roaaar :)

    Really wonderful work - reminds me of my safari trip in south africa last january. Has sort of a wild safari look between the top and the legs.

    Andy
    Andy
    Keep Life Simple

Similar Threads

  1. Table Saw Review Griz 1023SL
    By john whittaker in forum General Woodworking and Power Tools
    Replies: 23
    Last Post: 03-16-2010, 4:35 PM
  2. Has Festool solved the squareness problem with the new MFT3 table?
    By Daniel Hillmer in forum General Woodworking and Power Tools
    Replies: 39
    Last Post: 10-22-2008, 11:18 PM
  3. Solid Maple table
    By Steve Jenkins in forum General Woodworking and Power Tools
    Replies: 7
    Last Post: 02-10-2008, 10:34 PM
  4. Project: Hall Table
    By Jim Becker in forum Woodworking Projects
    Replies: 43
    Last Post: 04-30-2007, 5:18 PM
  5. maple farm table
    By fred woltersdorf in forum General Woodworking and Power Tools
    Replies: 16
    Last Post: 02-18-2006, 3:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •