A while ago I wrote an article for SMC about wooden knobs and pulls. (http://www.sawmillcreek.org/articles/9/) This post is essentially chapter two for that article.
I’ve been thinking about pulls for an armoire. The style of armoire is on the modern side, so the pulls should be in that style too. The doors of the armoire are 20” wide by 50” tall, and the drawers in the base are 40” wide by 11” tall. Therefore, the door pulls might be 8” tall or so, and the drawer pulls a little smaller.
Below are some designs I’ve been playing with. All of them fasten to the door with 8-32 machine screws from the back.