Does anyone know if there are any potential risks to one's health with the dust and fumes that come off the rubber that is used for rubber stamps. The stuff I use is a grey "pretend" rubber that is supposed to be vanilla scented (trust me - you would not want to use this to flavour your custard). Although I have an extraction system, my workshop still smells for days after I've done some rubber stamps, and there is a very slight residual dusting all over the place. And when cleaning the inside of the laser, there is quite a lot of this grey dust that is really fine, gets everywhere and stinks.
I'm sure this will prompt all kinds of recommendations for turbo powered extraction systems, all of which will be unavailable or too expensive in the UK. My query is really about the health issues surrounding the dust.