Decoration fair & LaserTile first public appereance

[onur cakir]

Hi !

Here are some photos from Villa Decoration Fair in Istanbul last week.

I've presented LaserTile products and my other engraving products for first time to public.

'Cause of economic depression on all over the world the fair was not so crowded but my place was the crowdest stand in the fair ! (hit to wood)

Architechts were crazy about LaserTile products

[onur cakir]

Here is an overview of my stand and my first panel with lasertile.

DaVinci panel is 15"x47"

No photograv
600 DPI S65 P60

big size img;

www.decodepo.com/depo/IMG_3114.JPG
www.decodepo.com/depo/IMG_3128.JPG

[onur cakir]

And here is my Bouguereau panel, regards to Frank

15" x 55"

No photograv
600 DPI S65 P60

big size img;

www.decodepo.com/depo/IMG_3141.JPG

[Tim Bateson]

Nice work. How long does it take to laser all the pieces for something that large?

[onur cakir]

Chess table

23" x 23"

Cream natural marble (2 pieces) engraved and filled with acrylic paint. Than applied "fixative" a kind of lacquer in aerosol format.

If anyone needs .cdr file of this project i would love to send it. Just contact me please.

big size img;

www.decodepo.com/depo/IMG_3131.JPG

[onur cakir]

my floor panel;

70" x 70" black granite (18 pcs)

No photograv

600 DPI S70 P100

big size img;

www.decodepo.com/depo/IMG_3132.JPG

[onur cakir]

girl in marble

cream natural marble engraved and filled with acrylic paint. Than applied "fixative" a kind of lacquer in aerosol format.

12" x 24"

big size img;

www.decodepo.com/depo/IMG_3129.JPG

[onur cakir]

and my sublimation project

31" x 49"


big size img;

www.decodepo.com/depo/IMG_3127.JPG

[onur cakir]

Nice work. How long does it take to laser all the pieces for something that large?

Thank you Tim, well as far as i remember for one 8" tile with my settings 600 DPI S65 P60 it took around 20 minutes.

So for 24 tiles around 8 working hours.

[Margaret Turco]

These are all lovely examples! No wonder everyone was interested in your products. After you put in so much time on these, I hope you get many orders!

On the granite floor panel, did you color fill the areas that are more white?

Good luck!

[onur cakir]

These are all lovely examples! No wonder everyone was interested in your products. After you put in so much time on these, I hope you get many orders!

On the granite floor panel, did you color fill the areas that are more white?

Good luck!

Thank you Margaret, i hope i ll have orders soon because with time i spend a fortune for those products

i didnt used any color filling for granite. Those are cheap black granites from China. The reason that i use "cheap" granite is "absolute gray" comes out when you engrave it.

[Pete Simmons]

Not surehow you get the image into the tiles in Corel but I have found

1. Set up a grid of the size tiles you use.

2. Power Clip your image onto/into the grid.

3. Select a few tiles at a time to engrave.

Assures perfect alignment and is quick and easy.

[Mike Null]

Onur

Thank you for sharing your splendid work. It is the best I've seen and I'm sure you'll have success selling it.

[Dave Johnson29]

Beautiful work Onur,

I hope you have great success, you deserve it for the effort, skill and talent that you have put into those projects.

I envy your skills.

[Frank Corker]

Beautiful work!