Results 1 to 4 of 4

Thread: Pen Kit Comparisons

  1. #1
    Join Date
    Aug 2008
    Location
    Mobile, Alabama
    Posts
    39

    Pen Kit Comparisons

    Has anyone ever prepared a side-by-side comparison of the pen kits available under various names from the major suppliers (Woodcraft, Craft Supplies, Penn State, etc.) so that a customer can easily determine whether his bushings from one will work well with a kit from another -- and if so, which proprietary names match up with one another?

    It would be great to share this information if it's handy. Thanks

  2. #2
    Join Date
    Jun 2006
    Location
    Burlington,WI
    Posts
    231
    I know the seirra and wallstreet or wallstreet II are the same kit and I believe all of the smillines 7mm are real close and cigars I used differant kits with the same set of bushings.


    Bill

  3. #3
    Alec:
    I recall that over at the IAP there is a comparison chart and maybe even some software that will chart the different pen kits, bushings, and drill bits necessary. I don't have a link but you could do a "kit comparison" search and find it. Try this link: http://www.penturners.org/forum/show...kit+comparison

    All the best.

    Don
    Last edited by Don Carter; 01-21-2009 at 7:56 PM.

  4. #4
    Join Date
    Feb 2008
    Location
    Alexandria, Virginia
    Posts
    185

    "Dance like nobody's watching; love like you've never been hurt. Sing like nobody's listening; live like it's heaven on earth."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •