Doe's anyone recognize this font having trouble matching this.It looked easy but nothing i have matches this.
SS TAG.jpg
Doe's anyone recognize this font having trouble matching this.It looked easy but nothing i have matches this.
SS TAG.jpg
The closest I have is ISOCPEUR
And the Zero is thinner. Other digits at least 1, 2 and 4 are the same.
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
Check out DIN Condensed.
ULS 50 Watt
Sublimation
Sandblasting
Diamond Drag/Rotary Engraver
I agree with Dave. DIN is the font.
I read recipes the same way I read science fiction. I get to the end and I think, "Well, that’s not going to happen."
SS TAG.jpgnotdin.jpg
The DIN I have is real close, but check the Q in Brian's sample, then in mine- pretty much everything matches but the Q in Brian's had dead-flat sides, mine has much rounder sides- the other issue is the rest of the font may not be close. Could be a different version of DIN is a better match...
that all said, the numbers are pretty much dead on...
here's my DIN alphabet...
DIN.jpg
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now - fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
That was the closest I found to set it up with John, was hoping to match it but might have to use ISOCPEUR. Thanks for the help everyone. Going to keep looking.
Last edited by Mike Chance in Iowa; 01-21-2017 at 6:05 PM.
I read recipes the same way I read science fiction. I get to the end and I think, "Well, that’s not going to happen."