Not sure if this is the right area to post this,,,
I surely am not the only one with this problem, so once again I turn to you more experienced people for a solution. I have a small Ford Ranger with the step sides. The wheel wells come to the inside of the bed causeing my truck bed to be real narrow (less than 4 feet). I am interseted in trying to make stuff from plywood but cannot haul the plywood without fear of it blowing out of the truck (best price of plywood is 30 miles away). So I ask, if this was your problem or you know of a solution (other than buying a new truck), can you help me out. I was thinking of some sort of home built rack that I could mount to the truck to keep the plywood standing up on the edge and use some sort of clamping system or bungie cords to keep the wood in place as traveling down the road. If you have dealt with this problem and solved it, pics would be nice as so I could have a visual to work from.
Thanks for any help, Doug