I'm considering buying a corded drill. I mostly use an 18V Hitachi which is fine most times but the batteries don't hold a charge too long anymore, frequently changing them. Besides the Hitachi, I also have a 1/2" Porter Cable hammer drill but it's too big for smaller projects.
Here are the considerations:
1. comfortable to use (balance, weight, etc.)
2. 3/8 or 1/4 OK, don't need 1/2" capable (see above)
3. A clutch would be great, but not mandatory
4. also a keyless chuck would be nice, but also not mandatory
I have read this thread http://www.sawmillcreek.org/showthre...t=corded+drill
I am thinking that I need two usable drills when doing certain tasks and believe that I'd be better served having a smaller corded drill rather than another cordless. I don't use pocket screws yet but may someday.
On a side note, I have started another thread regarding quick-change drill/driver sets. I have one or more now that are just ok. Thanks for your thoughts and recommendations.