-
Very nice work Ken. You did a great job on the bowl itself, and the piercing looks excellent to me. Your pattern is nice and random. That's hard to do.
-
Piercing
To answer questions posted:
I did not use a pattern, except that I drilled a series of holes in 3 rings while it was still on the lathe. These were not enough and a few holes were drilled using the burr I was piercing with.
The edge of the bowl was a little thicker than I wanted at about 3/32". I was hoping to get down to 1/16". The rim started vibrating and with the few small knots there I was concerned about losing it so I stopped. Had to do some sanding to even out the back side of the rim.
Thanks to all for the comments.
-
Thanks Ken. Great piece of work.
Richard in Wimberley
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules