Help - Narrow Pull Out Larder Hardware

[Steven Golick]

Does anyone have experience with sourcing hardware for a pull out larder - max width 9", max depth 24", max height 7 feet. I can find lots of wire units at 11", but I don't have that space.

I would prefer find a pre-built welded wire unit running on a bottom mount full extension. If not, what runner system would you recommend.

Many thanks in advance.

Steven

[Jamie Buxton]

Here's a page with several major suppliers of those pull-out larder systems. http://www.kitchensource.com/pantry/ (This source is rather expensive, so if you find one whose specs you like, it will pay to shop around.)

To get a specific width that they don't make, you can utilize their slides and uprights, but build your own shelves. Plywood is a perfectly good shelf material.

[Steven Golick]

Thanks - that looks like what I am looking for (although very expensive). I will try to hunt a bit for something a bit more economical, but its good to know that the hardware is available without the baskets, which is what I am looking for.

Thanks for the quick response

Steven