Hey folks. I just picked up a bottle of Titebond CA glue (this stuff http://www.titebond.com/IntroPageTB....uctIntroTB.asp) to try on some miters in trim that I'll be installing. I just tried to put together a miter on 2 pieces of poplar and I stuck to the joint but the wood would not bond. I held it together for a good 30 or 40 seconds and nothing! It talks about an activator on the bottle but there's only one opening and one solution in the tube.

Am I missing something? Is there another activator or product I should use in conjunction with this glue?

Any advice is welcome! Thanks!