Results 1 to 15 of 26

Thread: Curly Pine Pantry Cabinet

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    15,658
    Blog Entries
    1

    Curly Pine Pantry Cabinet

    Here is the curly pine pantry cabinet I just completed and delivered to my daughter in law over the fourth of July weekend. The pine was in the select pine bin at the local HD. I was concerned that the grain might not take the stain evenly enough to look good, but it worked out well. The grain isn't too apparent in the photos. My daughter in law came up with the design, which turned out quite well.

    The pantry is 48" wide ( actually 47-3/4 so it would fit in the back of the Explorer for delivery), 80" tall and just 12" deep. I used clear pine for all the doors and exterior surfaces and #2 pine for the shelves and interior panels to keep down the cost. The raised panels were cut on my table saw, though the initial face cuts are done with a router. All the shelves are adjustable.

    It is finished with Minwax Golden Pecan stain and Deft Semi-gloss clear wood finish.
    Attached Images Attached Images
    Lee Schierer
    USNA '71
    Go Navy!

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

Similar Threads

  1. Curly Cherry Tin Cabinet Finished W/Pics (long)
    By Jason Tuinstra in forum Woodworking Projects
    Replies: 75
    Last Post: 06-25-2011, 8:05 AM
  2. Curly Pine
    By Lee Schierer in forum General Woodworking and Power Tools
    Replies: 2
    Last Post: 05-20-2004, 6:16 PM
  3. LOML requests a free standing kitchen cabinet
    By Bart Leetch in forum Design Forum
    Replies: 1
    Last Post: 01-14-2004, 2:25 PM
  4. CD Cabinet FINALLY Finshed-Delivered! *PICS*
    By Dennis Peacock in forum General Woodworking and Power Tools
    Replies: 39
    Last Post: 12-03-2003, 10:30 PM
  5. My first attempt at cabinet building
    By Robert Mayer in forum General Woodworking and Power Tools
    Replies: 2
    Last Post: 11-10-2003, 11:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •