I posted Previously that I need a set of Rubber Jaws for my Chuck and was asked what brand it was, it is an AXMINSTER 4 jaw Chuck. While looking up the Name I also discovered AXMINSTER SOFT TOP JAWS, which are made from nylon and may very well fit the bill.

Now, on to Light Pulls...
Someone posted some time ago about making Light/Fan Pulls, and he was told about PSI and Craft Supply and their kits and Plans, which I myself have used. I have also been thinking about doing it another way and having finally done something about it I thought I would share my thoughts and post pictures of the process and finished product. BTW, this is why I needed the soft jaws so I could chuck something small like this and why I asked about getting things squarely mounted on the lathe.


Can't seem to Upload Pictures, I get a screen saying host not available.

So I made an Album on Yahoo and Posted the Pictures There.

http://photos.yahoo.com/woodpusher53

Let me know what you think and If you have any Pointers. I am just learning so any criticism will not bother me in the least.

Stan