Best prices for DC pipes

[William Long]

So, I've hooked up my 2hp Grizzly cyclone and now I need the pipes, adapters, wyes, etc. I'm going to go with steel and not PVC and was wondering if anyone has already done the research on where is the most economical place to buy from, including shipping (Grizzly, Penn, etc). My budget will be around $500 for 6 drops in about 700sqft.

If I would look locally, what do I look under for steel pipes. Anyone know of any resources in Indianapolis?

Thanks.

[William Long]

Never mind. I finally found some information doing a better search here.

[Shawn Stennett]

can you post the thread where you found your answer?

[Andy McCormick]

Indiana Supply has spiral piping on hand. Tangent Air in Circleville Ohio (south of Columbus) makes the laterals and spiral piping on site.

[timothy harwell]

http://www.woodworkingshop.com/cgi-b...RPSG&group=DCA

this is some pretty good hose. much better than that cheap stuff from PSI woodworking on amazon. 24.95 for 20' of 4" hose. and if you live close to one of the klingspor woodworking shops, right now they have a 25% off in-store coupon when you buy two 20' lengths.

[Ray Newman]

For piping, check a local HVAC supplier for prices. Just tell them what gauage & dia. you need.

[Tom Wassack]

can you post the thread where you found your answer?

Here's a link from the week of 3/2/2009 - http://www.sawmillcreek.org/showthread.php?t=106141.

Respectfully,
Tom Wassack
Asheboro, NC

[William Long]

can you post the thread where you found your answer?

Tom's link is what I found.